Steve Christall wrote: > Currently I have a combo backend / front end running myth, and currently > outputting at 800x600 over analogue VGA (TNT2!) to my 1280x720 DVI > capable projector. This works pretty well > > I want to switch to DVI, and run my projector at its native resolution. > My box only has PCI slots, and I have found a PCI FX5200 with DVI-I > interface. > > 1 / Is this possible. ie is there a modeline to run the FX5200 at > 1280x720 over DVI? Do you still use modelines for DVI output, I guess > there isn't a refresh rate? If so could I please have it :o)
It is; you just need to use one of the modeline calculators that are available. I use an FX5200 to drive an LCD at 1280x768. I had another LCD before that for a few days that allegedly was 1280x720, but I took it back because there was no apparent way to coax it into actually running at its native resolution. I still have the modeline for it; you might try it as a starting point:
Modeline "[EMAIL PROTECTED]" 73.78 1280 1350 1390 1650 720 725 730 750
> 2 / Would #1 above be called progressive scan?
Yes.
> 3 / How would the deinterlacing work (I capture from a DVB card and > PVR350). Do I need to deinterlace?! I think at the moment my projector > is doing this?
You would use MythTV's deinterlacing options (which unfortunately don't include inverse 3:2 pulldown for the many shows that would benefit from it, but they'll still clean up a fair bit of interlace noise).
_/_ / v \ Scott Alfter (IIGS( http://alfter.us/ Top-posting! \_^_/ rm -rf /bin/laden >What's the most annoying thing on Usenet?
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
