|
jkondis - Thanks, I had already found that site and
had it working, but the picture quality was really bad (fuzzy and
warped). I'm wondering if I did something wrong or it's just my video
board. Nick - I have ivtvdev installed, and, my xorg.conf is very similar to Jarods. However, at your suggestion, I did some more searching. I found a post that suggests that I should be able to have X run on just the TV, so I tried setting it up. Here's the xorg.conf sections, but it gives me some errors that I don't understand. Where does it get device (null)? Thanks again for the help. Don .......... (==) Using config file: "/etc/X11/xorg.conf" (EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device (null) (EE) Screen 0 deleted because of no matching config section. (EE) Device(s) detected, but none match those in the config file. Fatal server error: no screens found Please consult the The X.Org Foundation support at http://wiki.X.Org .................... ******************************** Section "Monitor" Identifier "NTSC Television on Hauppauge card" # D: 34.563 MHz, H: 37.244 kHz, V: 73.897 Hz HorizSync 30-68 VertRefresh 50-120 Mode "720x480" DotClock 34.564 HTimings 720 752 840 928 VTimings 480 484 488 504 Flags "-HSync" "-VSync" EndMode EndSection Section "Device" Identifier "Hauppauge Device" Driver "ivtvdev" Option "ivtv" "/dev/fb1" BusID "PCI:1:08:0" EndSection Section "Screen" Identifier "Hauppauge Screen" Device "Hauppauge Device" Monitor "NTSC Television on Hauppauge card" DefaultDepth 24 DefaultFbbpp 32 Subsection "Display" Depth 24 FbBpp 32 Modes "720x480" EndSubsection EndSection Section "ServerLayout" Identifier "Dual Display" Screen "Hauppauge Screen" InputDevice "Mouse1" "CorePointer" InputDevice "Keyboard1" "CoreKeyboard" EndSection **************************************** ---From lspci: 01:08.0 Multimedia video controller: Internext Compression Inc iTVC15 MPEG-2 Encoder (rev 01) ---From cat /var/log/messages |grep "iTVC15 TV out" Apr 16 22:25:02 sanson kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer device ---From /var/log/messages: (II) v4l driver for Video4Linux (II) IVTVDEV: driver for framebuffer: PVR-350 (II) Primary Device is: PCI 03:00:0 (--) Chipset PVR-350 found (EE) ivtvHWProvbe failed to do IVTVFB_IOCTL_GET_STATE for device (null) (EE) Screen 0 deleted because of no matching config section. (II) UnloadModule: "ivtvdev" (EE) Device(s) detected, but none match those in the config file. -----PCI 03:00:0 is the nvidia video board |
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
