> I did a little test. I used xine and played a DVD and a myth > recording. Both had very similar volume levels. So I guess > that means my problem has more to do with my mvp1000. > > Any other mvp1000 users experience anything similar? Is there > way to get the mvp1000 to send out stronger/louder audio? >
Back before I got sp-diff audio working I was using the line out of the sound card and going into the line in of the external amplifier. I also found that the levels to be quite a bit lower than my other inputs. This leads me to think that there is a different standard between the two appliences. Or perhaps an impedance issue. My work-around was to turn up the mixers to about 90% on the myth box. This was less than perfect as you could hear some distortion on loud passages which I assume was the line-out amp hitting the rail. Not sure if your myth box has sp-diff or coax audio out but if it does, I would recommend that option. Otherwise you might end up building a little op-amp circuit to boost the signal level.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
