I took some time off before trying again. I'm following Jarod's guide up to the DVB part. He says he has his working without problems only using the stock install and linuxtv-dvb. I Installed the linuxtv-dvb but when it loads up I get this in my dmesg:
Linux video capture interface: v1.00 cx2388x blackbird driver version 0.0.4 loaded cx88[0]: Your board isn't known (yet) to the driver. You can cx88[0]: try to pick one of the existing card configs via cx88[0]: card=<n> insmod option. Updating to the latest cx88[0]: version might help as well. cx88[0]: Here is a list of valid choices for the card=<n> insmod option: cx88[0]: card=0 -> UNKNOWN/GENERIC cx88[0]: card=1 -> Hauppauge WinTV 34xxx models cx88[0]: card=2 -> GDI Black Gold cx88[0]: card=3 -> PixelView cx88[0]: card=4 -> ATI TV Wonder Pro cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert cx88[0]: card=6 -> AverTV Studio 303 (M126) cx88[0]: card=7 -> MSI [EMAIL PROTECTED] Master cx88[0]: card=8 -> Leadtek Winfast DV2000 cx88[0]: card=9 -> Leadtek PVR 2000 cx88[0]: card=10 -> IODATA GV-VCP3/PCI cx88[0]: card=11 -> Prolink PlayTV PVR cx88[0]: card=12 -> ASUS PVR-416 cx88[0]: card=13 -> MSI [EMAIL PROTECTED] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T cx88[0]: card=15 -> DVICO FusionHDTV DVB-T1 cx88[0]: card=16 -> KWorld LTV883RF cx88[0]: card=17 -> DViCO - FusionHDTV 3 Gold cx88[0]: card=18 -> Hauppauge Nova-T DVB-T cx88[0]: card=19 -> Conexant DVB-T reference design cx88[0]: card=20 -> Provideo PV259 cx88[0]: card=21 -> DVICO FusionHDTV DVB-T Plus cx88[0]: subsystem: 7063:3000, board: UNKNOWN/GENERIC [card=0,autodetected] cx2388x v4l2 driver version 0.0.4 loaded ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 193 cx88[0]: Your board isn't known (yet) to the driver. You can cx88[0]: try to pick one of the existing card configs via cx88[0]: card=<n> insmod option. Updating to the latest cx88[0]: version might help as well. cx88[0]: Here is a list of valid choices for the card=<n> insmod option: cx88[0]: card=0 -> UNKNOWN/GENERIC cx88[0]: card=1 -> Hauppauge WinTV 34xxx models cx88[0]: card=2 -> GDI Black Gold cx88[0]: card=3 -> PixelView cx88[0]: card=4 -> ATI TV Wonder Pro cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert cx88[0]: card=6 -> AverTV Studio 303 (M126) cx88[0]: card=7 -> MSI [EMAIL PROTECTED] Master cx88[0]: card=8 -> Leadtek Winfast DV2000 cx88[0]: card=9 -> Leadtek PVR 2000 cx88[0]: card=10 -> IODATA GV-VCP3/PCI cx88[0]: card=11 -> Prolink PlayTV PVR cx88[0]: card=12 -> ASUS PVR-416 cx88[0]: card=13 -> MSI [EMAIL PROTECTED] cx88[0]: card=14 -> KWorld/VStream XPert DVB-T cx88[0]: card=15 -> DVICO FusionHDTV DVB-T1 cx88[0]: card=16 -> KWorld LTV883RF cx88[0]: card=17 -> DViCO - FusionHDTV 3 Gold cx88[0]: card=18 -> Hauppauge Nova-T DVB-T cx88[0]: card=19 -> Conexant DVB-T reference design cx88[0]: card=20 -> Provideo PV259 cx88[0]: card=21 -> DVICO FusionHDTV DVB-T Plus cx88[0]: subsystem: 7063:3000, board: UNKNOWN/GENERIC [card=0,autodetected] cx88[0]/0: found at 0000:00:09.0, rev: 5, irq: 193, latency: 32, mmio: 0xdd000000 tuner: chip found at addr 0xc2 i2c-bus cx88[0] cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: cx88: tvaudio thread started cx88[0]/0: AUD_STATUS: 0x36 [mono/pilot c1] ctl=BTSC_FORCE_MONO It seems to not reconise the HD3000 card. Will this still work? How do I setup Mythtv for HDTV OTA? kel _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
