Darn, I compiled without "-–enable-opengl-vsync". 
Can I gain a lot of cpu by recompiling?

I have confirmed that GLX is loading (from xorg.0.log):

(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
(II) Loading extension GLX
(II) Loading extension NV-GLX
(II) Initializing extension GLX

CPU is fine except when I record two DTV programs, and watch a third. 
I have disabled xvmc and enabled kernel deinterlacing to reduce
combing. Video/audio is fine, but I'm concerned about intermittent
frame drops during the recordings.

P4-3.4
nvidia FX5200, v7174 drivers
AGP 8x confirmed
512MB PC3200 (ddr 400MHz)
RTC freq=1024
2x pcHDTV
Onboard spdif coax

Donn

On 4/19/05, Paul Leppert <[EMAIL PROTECTED]> wrote:
> On 4/19/05, David Wood <[EMAIL PROTECTED]> wrote:
> <snip>
> >
> > What do you put in your ./configure arguments, if you're building for an
> > Athlon XP 3000+?
> >
> > I used:
> >
> > ./configure  --enable-xvmc --enable-opengl-vsync --enable-directfb
> >
> 
> I have an Athlon XP 2000+ with an nvidia FX 5500 (only at AGP 4x due
> to mobo limitations) running 0.18 (originally built using Jarod's
> instructions and then migrated to CVS).  With this configuration, I
> can run 720p HDTV just barely (3-5% idle) with deinterlace and w/o
> XvMC.  1080i stutters badly.  SDTV runs along swimmingly at 75% idle.
> I'm outputting via VGA to a widescreen display at 1376x768 and
> glxgears gives me a score of 2650.  I'm also using the 7174 drivers
> and the 2.6.10.1.770 kernel under FC3.
> 
> The configure parameters I used were:
> 
> ./configure -–arch=athlon-xp –-prefix=/usr –-disable-joystick-menu
> --disable-firewire –-enable-dvb -–dvb-path=/usr/include
> -–enable-opengl-vsync --enable-xvmc
> 
> (by the way, what does directfb give you?  Just to be thorough, where
> do I find the documentation on each of the configure options?  I'm
> assuming I shouldn't be doing anything with --disable-mmx,
> --disable-x11, --disable-xrandr, --disable-xv, and --enable-directx.
> But should I be looking at --enable-proc-opt,  --disable-altivec,
> --enable-dvb-eit, --disable-xvmc-vld, and --enable-directfb?  Also,
> for the sound options, if I'm using ALSA, should I be using
> --disable-audio-oss, --disable-audio-arts, and/or
> --disable-audio-jack?)
> 
> I am currently in the process of upgrading to an XP 3200+ (I'm doing a
> reinstall to clean up some inefficiencies from the previous install
> and incorporate some changes to the hardware with the new mobo).  I'll
> post new info once I'm up and running again with the 3200+.
> 
> phlepper
> --
> I hear and I forget. I see and I remember. I do and I understand.  --  
> Confucius
> 
> _______________________________________________
> mythtv-users mailing list
> [email protected]
> http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
> 
> 
>
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to