The PVR-500 shows up to the system as 2 seperate PVT-150s. Each 150 has it's own tuner. Both tuner's indexes start at zero. You should change your input on the second "150" to be Tuner0 as well. I have a PVR-250 and a PVR-500 and all of three use 'Tuner0'.
Good luck, Ken On 4/25/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Okay I've used Jarrod's guide and the card works. > I can get video and audio. > But... > I can't seem to be able to record one channel and then watch > live TV on another. > > My PVR-500 according to /var/log/messages is recognized > as two PVR-150's. > > So when I go to mythtvsetup > enter > capture cards. > I pick mpeg-2 encoder (PVR-250,PVR-350) > Video device: /dev/video0 > Default Input: Tuner0 > > In input connections I have > both tuner's set to cable. > > . > When I run mythfrontend > I can switch tuners by hitting the C key > but I can't get picture in picture nor can I > watch tv on one channel and record another. > > I've tried setting it up as two cards. > where I added a second mpeg-2 encoder > video device: /dev/video1 > Default input Tuner1 > Set both cards/tuners to cable in the input connections. > > But when I do this I can't watch live TV. > > What do I do? > > Mark > > Now here is where I am stumped. > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
