On 4/20/05, John Pullan <[EMAIL PROTECTED]> wrote: > On 4/19/05, Mark Howells <[EMAIL PROTECTED]> wrote: > > I've just d/loaded 0.18 and compiled & installed but mythtv won't tune > > my Nova-t (tda10045). > > > > I'm using gentoo 2.6.11-r3. The card works fine in other environments e.g > > > > bash-2.05b$ ./tzap "BBC ONE" > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > tuning to 641833330 Hz > > video pid 0x0258, audio pid 0x0259 > > status 00 | signal c8c8 | snr 9494 | ber 0001fffe | unc 00000000 | > > status 1f | signal c8c8 | snr fefe | ber 00000000 | unc 00000000 | > > FE_HAS_LOCK > > status 1f | signal c8c8 | snr fefe | ber 00000000 | unc 00000000 | > > FE_HAS_LOCK > > > The only thing I can suggest is filling in all the tuning parameters. > Bandwidth and inversion are the more important ones. I'll check into > this tonight when I get home to make sure there isn't anything more > fundamental broken. ( TBH I can't think what I changed in this area > for 0.18, but then again I can't remember what I did last week > sometimes :) )
Bang on. I'n not sure which parameter it needed but I filled in those that scan gets from dvb-t/uk-SandyHeath and all is well. The defaults all used to work in 0.17 though. I've been following this DVB rewrite since you started and I'd like to thank you for your work in getting DVB / Mythtv to a useful state Cheers Mark _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
