I had this working on R4V5 (or last stable).. I get errors using R5A15. I followed the instructions on www.iwamble.net. I had to remove the --tag=CC flags to get it to compile and then installed it. I used lirc-0.7.1pre4.tar.bz2. (modified the lirc2remote so it would work of course, which it did). Whenever I try to change_channel.csh I get errors: remote_irsend: command failed: SEND_ONCE JVC_RAW 2 remote_irsend: transmission failed remote_irsend: command failed: SEND_ONCE JVC_RAW 4 remote_irsend: transmission failed remote_irsend: command failed: SEND_ONCE JVC_RAW 8 remote_irsend: transmission failed /usr/local/bin/remote_irsend: command failed: SEND_ONCE JVC_RAW SELECT /usr/local/bin/remote_irsend: transmission failed
I am using JVC_RAW as my /etc/remoted.conf (and in channel.pl). Here is my dmesg from boot: kernel: remote_dev: IR Remote Control driver registered, at major 72 mythtv kernel: remote_dev: remote_register_plugin: sample_rate: 0 mythtv kernel: remote_sir: I/O port 0x02f8, IRQ 3. mythtv kernel: remote_sir: Installed. mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61 mythtv kernel: bttv: driver version 0.9.15 loaded mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture mythtv kernel: cx2388x v4l2 driver version 0.0.4 loaded mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) mythtv kernel: ivtv: i2c attach [client=Hauppauge IR,ok] mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR) mythtv kernel: ivtv: i2c attach [client=Hauppauge IR,ok] mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10 Here is my /var/log/remoted: mythtv remoted 0.7.1pre4: error processing command: SEND_ONCE JVC_RAW 2 mythtv remoted 0.7.1pre4: transmission failed mythtv remoted 0.7.1pre4: removed client mythtv remoted 0.7.1pre4: accepted new client on /dev/remoted mythtv remoted 0.7.1pre4: too short gap: 100000 mythtv remoted 0.7.1pre4: error processing command: SEND_ONCE JVC_RAW 4 mythtv remoted 0.7.1pre4: transmission failed mythtv remoted 0.7.1pre4: removed client mythtv remoted 0.7.1pre4: accepted new client on /dev/remoted mythtv remoted 0.7.1pre4: too short gap: 100000 mythtv remoted 0.7.1pre4: error processing command: SEND_ONCE JVC_RAW 8 mythtv remoted 0.7.1pre4: transmission failed mythtv remoted 0.7.1pre4: removed client mythtv remoted 0.7.1pre4: accepted new client on /dev/remoted mythtv remoted 0.7.1pre4: too short gap: 100000 mythtv remoted 0.7.1pre4: error processing command: SEND_ONCE JVC_RAW SELECT mythtv remoted 0.7.1pre4: transmission failed Here is my bootmisc.sh file: /usr/local/sbin/lircd (added when I first started/installed lircd) # Starting Actisys stuff echo "Starting remoted..." setserial /dev/ttyS1 uart none /sbin/modprobe remote_sir /usr/local/sbin/remoted List of my /dev directory settings, chmod 777 on all /dev/remote* crwxrwxrwx 1 root root 72, 0 Apr 26 14:48 /dev/remote srwxrwxrwx 1 root root 0 Apr 26 15:25 /dev/remoted prwxrwxrwx 1 root root 0 Apr 26 15:02 /dev/remotem Once again thanks in advance... _________________ ASUS A7N266 Micro-ATX Motherboard Athlon 2200 processor 256K Kingston PC2100 Memory MicroAtx Case 2 PVR250's w/remote eVGA e-GeForce4 mx440 bx (64 Ram with Tv/Out (Svideo)) Lite-on DVD cd-rw combo 120 GB Western Digital __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
