Am Samstag, den 30.04.2005, 14:43 -0400 schrieb Tony Rein: > On Saturday 30 April 2005 01:23 pm, Neale Swinnerton wrote: > > I've had this maybe last year or the year before, nothing to do with > > mythtv then. Check that you've got you processor type set properly in > > your kernel config. you can download a suitable .config from > > http://www.epiawiki.org/
This was the relevant hint. Thanks, I usually use 386 kernels on the epia, but using Cyrix/C3 as processor type activated the CONFIG_X86_CMPXCHG in the .config. > > Also, I've read somewhere that CVS DRM doesn't support 2.6.11, and I get > > missing symbol errors when I modprobe via built against 2.6.11. I'm > > using 2.6.8.1 with good success, so I didn't investigate further. 2.6.11 works fine. A change in processor type and a make-kpkg was all that was needed. via-drm compiles fine afterwards. Unfortunately I didn't get away without recompiling. Luckily I don't have to compile on the epia. BTW, make -j on a mosix cluster is not race-safe! ;-) Thanks to all, Torsten
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
