Hi, I've been stumped for the last several hours and haven't had luck with Google or the archives.
I had my myth working amazingly well for about 30 minutes until I got curious and clicked "System Status" in the menus. This caused myth to crash and ever since I've been unable get my myth working again. :-( I'm using MythTV 0.18 on Fedora Core 3 from Jarod's guide. I have a PVR-350 with TV-out and two PVR-250s for more recording. Everything is running on just one machine. It has a wireless NIC for accessing channel information (which is at wlan0, not eth0). I previously had BackendServerIP and MasterServerIP set to 192.168.2.3, but I've since set them to 127.0.0.1. This seems to have made no difference. Anytime I try to Watch TV now from a fresh boot, it works for about a 30 seconds to a minute, but won't respond to the remote (which works perfectly in the menus). While the video is quite nice overall, I do see brief burst of thin horizontal lines of static, which I did not see before. After this time, it will crash back to the menus (sometimes all the way to the terminal with a Segmentation fault.) If I try to watch LiveTV again, about 90% of the screen will be covered by a big black box (but I can see perfect video around the edges) for about the same duration of time. For just a second before it crashes I see perfect video, then it usually crashes to the terminal with Segmentation fault. I receive the same results as a normal user and as root. I receive the same results when I tell myth to use my pvr-350 tv-out and also when I tell it not to. Thinking that I (or my System status crashed) may have fouled up some setting, I decided to completely wipe out the mythconverg database and rebuild it. Sadly, that didn't make any difference. Also, if I cat /dev/video* >> ~/sometest.mpg that seems to play back just fine for each card. Finally, I do have lirc_lib installed because some parts of myth depend on it, but I don't believe I need lirc. My remote uses a different driver based off the old ati_remote driver. For laughs I have tried installing lirc and starting it up before mythfrontend, but I've not noticed that make a difference. Does anyone have any ideas that I can try? I'm having a real hard time with this one! Thanks! Following is the output I receive from mythfrontend: [EMAIL PROTECTED] ~]$ mythfrontend 2005-05-01 21:51:27.972 New DB connection, total: 1 Total desktop width=720, height=480, numscreens=1 2005-05-01 21:51:27.976 Using screen 0, 720x480 at 0,0 2005-05-01 21:51:27.978 mythfrontend version: 0.18.20050409-1 www.mythtv.org 2005-05-01 21:51:27.979 Enabled verbose msgs : important general Total desktop width=720, height=480, numscreens=1 2005-05-01 21:51:28.459 Using screen 0, 720x480 at 0,0 2005-05-01 21:51:28.463 Switching to square mode (sleek) mythtv: could not connect to socket mythtv: No such file or directory lirc_init failed for mythtv, see preceding messages 2005-05-01 21:51:28.888 Joystick disabled. 2005-05-01 21:51:28.925 Registering Internal as a media playback plugin. 2005-05-01 21:51:28.938 Registering MythDVD DVD Media Handler as a media handler 2005-05-01 21:51:28.938 Registering MythDVD VCD Media Handler as a media handler 2005-05-01 21:51:29.121 Registering MythMusic Media Handler as a media handler SIP listening on IP Address 192.168.2.3:5060 NAT address 192.168.2.3 2005-05-01 21:51:29.285 New DB connection, total: 2 SIP: Cannot register; proxy, username or password not set 2005-05-01 21:51:31.074 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2005-05-01 21:51:31.081 Using protocol version 15 2005-05-01 21:51:31.113 Using protocol version 15 2005-05-01 21:51:32.162 Opening audio device '/dev/dsp'. 2005-05-01 21:51:32.162 Opening OSS audio device '/dev/dsp'. 2005-05-01 21:51:32.165 Using resampler. From: 0 to 1000 Using the PVR-350 decoder/TV-out 2005-05-01 21:51:32.646 Realtime priority would require SUID as root. 2005-05-01 21:51:32.674 Changing from None to WatchingLiveTV 2005-05-01 21:51:52.680 ReadStringList timeout (quick). Remote encoder not responding. 2005-05-01 21:51:52.680 WriteStringList: Bad socket 2005-05-01 21:51:52.680 ReadStringList: Bad socket Remote encoder not responding. 2005-05-01 21:51:53.042 WriteStringList: Bad socket 2005-05-01 21:51:53.042 ReadStringList: Bad socket Remote encoder not responding. ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) ASSERT: "i <= nodes" in /usr/lib/qt-3.3/include/qvaluelist.h (373) 2005-05-01 21:51:53.042 WriteStringList: Bad socket 2005-05-01 21:51:53.042 ReadStringList: Bad socket Remote encoder not responding. 2005-05-01 21:51:53.042 WriteStringList: Bad socket 2005-05-01 21:51:53.042 ReadStringList: Bad socket Remote encoder not responding. Segmentation fault [EMAIL PROTECTED] ~]$
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
