--- Mitko Haralanov <[EMAIL PROTECTED]> wrote: > On Wed, 4 May 2005 11:32:19 -0700 (PDT) > Howard Cokl <[EMAIL PROTECTED]> wrote: > > > Do you have twinview enabled? Or are you trying > to > > troubleshoot the VGA not working with the S-video > > disconnected. I may be wrong but I think any TV > can > > handle a 640x480 modeline so I would try one of > those > > and disconnect the s-video, check xorg.conf and > make > > sure that Option "TVOutFormat" "SVIDEO" is > either > > commentd out or removed. > > I don't have twinview and while trying to get the > VGA to work I don't > have the SVIDEO enabled. I am actually using two > different xorg.conf > files for the VGA and SVIDEO. > > Here are the relevant sections out the VGA xorg.conf > file: > > Section "Monitor" > Identifier "Monitor0" > VendorName "Toshiba" > ModelName "46in HDTV via AA 9A60" > HorizSync 15-46 > VertRefresh 59-60 > Option "dpms" > # 480i = 720x480i > # 480p = 640x480p > # 720p = 1280x720p > # 1080i = 1920x1080i > Modeline "1080i" 80.00 1920 1976 2016 2400 > 1080 1082 1085 1137 interlace #80MHz,33.3kHz,29.3 Hz > Modeline "480p" 27.15 720 736 776 896 480 > 482 483 505 # 27MHz,30.3kHz,60.0Hz > # The modelines below are from XFree86 > Modeline Generator > # > http://xtiming.sourceforge.net/cgi-bin/xtiming.pl > Modeline "[EMAIL PROTECTED]" 12.60 720 752 792 824 480 > 491 494 505 interlace > Modeline "[EMAIL PROTECTED]" 24.11 640 672 760 792 > 480 490 495 505 > Modeline "[EMAIL PROTECTED]" 73.78 1280 1312 1592 1624 > 720 735 742 757 > Modeline "[EMAIL PROTECTED]" 77.60 1920 1952 2240 > 2272 1080 1104 1110 1135 interlace > # The modelines below are from a posting on > MythTV Users mailing > # list for a Toshiba 57H83 > Modeline "1200x675" 75.960 1200 1420 1484 > 1688 675 695 708 750 +hsync +vsync > Modeline "1776x999" 74.500 1776 1942 1990 > 2200 999 1033 1045 1126 interlace +hsync +vsync > Modeline "540p" 39.956 960 1020 1100 1184 > 540 550 551 563 +hsync +vsync # 39.956 MHz 33.75 kHz > 59.94 Hz > EndSection > Section "Device" > Identifier "Videocard0" > Driver "nvidia" > VendorName "Chaintech" > BoardName "NVIDIA GeForce 4 MX (generic)" > EndSection > > > Section "Screen" > Identifier "Screen0" > Device "Videocard0" > Monitor "Monitor0" > DefaultDepth 24 > SubSection "Display" > Viewport 0 0 > Depth 24 > Modes "720x480" > EndSubSection > EndSection > > > > > -- > Mitko Haralanov I think if it works with a monitor attached but doesn't show anything when booting, your problem may be with the AA. Unfortunately the Audio Authority doesn't have a power light like the RCA transcoder. Did you buy it new? Can you verify that the A/C adapter is working?
Howard
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
