However, when I'm at the TV using the PVR350's remote and I try and change channels with either the Channel Up/Down button or the up/down arrow around the Okay (like you can with the Hughes DTV boxes), bad things happen. The up/down arrows freezes the screen for a while (long enough for oh say mythfrontend to core dump) and it dies. I have to restart the back end and then restart the frontend to get it to work and in many cases I have to run a channel changer script (pops up an X box that lets you select your inputs, channels, cable mode, etc.) and put the tuner back on ch 3.
If I use the Chan UP/DN buttons, I get a black screen then the core dump. If I enter the channels directly, I see what looks like Myth TV's program guide change, but the TV doesn't appear to change with it.
I'm piping my DirecTV into the cable jack (Tuner 0) on the 350. I have the DTV box to output on channel 3. I've told Mythtvsetup (0.18 btw, FC3 using Jarrod's setup), to use the change_chan.sh script from a previous post here about my IR problems. I tell it to start on channel 3 and there is a "live tv" channel, which I also set to 3, but it seems to change depending on what DTV channel I last set to.
Am I being stupid? Any help would be appreciated.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
