This didn't work. I got the same results. If I switch the cards around
so the 150MCE is detected first its encoder works fine, but the 350
TV-out doesn't work. When I boot, instead of the nice green tv-output I
get a flickery black image followed by no signal (my TV displays the
input number when when no signal is coming in). X starts without errors
but no picture. If I do dd if=/dev/video0 of=/dev/video17 I get audio
but no video. If I do dd if=/dev/video0 if=test.mpg I get a nice
looking mpg with audio (this also works with video1). Here's my current
modules.conf snippet (note that the 150MCE is detected first):
alias char-major-81 videodev
alias char-major-81-0 ivtv
alias char-major-81-1 ivtv
alias char-major-61 lirc_i2c
options saa7127 i2c_enable=-1,1
options ivtv ivtv_debug=1 ivtv_std=1 tuner=47,47
options cx25840 i2c_enable=1,-1 no_black_magic=1
I readed somewhere the cx25840's i2c_enable doesn't count 250/350 so I
removed the first -1 and it worked:
options cx25840 i2c_enable=1 no_black_magic=1
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
