Phil,
Thanks very much for your advice! I actually got a picture using xine instead, as per someone's suggestion:
tzap -r -c ~/.tzap/channels.conf "BBC ONE" & xine stdin://mpeg2 < /dev/dvb/adapter0/dvr0
worked fine.
But anyway.... like you, I did try adding the card in mythtv anyway, it scanned and found all channels, but am having problems watching the channels - mythfilldatabase doesn't pull in the program listings apart from BBC1, but even with BBC1 I can't watch it - and when I start up the backend with the DVB card in, I get:
desire:/home/piers# mythbackend
Running as a slave backend.
2005-05-16 14:56:03.471 DVB#0 DVB SI Table Parser Started
2005-05-16 14:56:03.578 DVB#0 Using DVB card 0, with frontend Hauppauge Nova-T DVB-T.
2005-05-16 14:56:03.579 DVB#0 DVB Signal Monitor Starting
2005-05-16 14:56:03.580 DVB#0 ERROR - Unable to find channel in database.
2005-05-16 14:56:03.584 DVB#0 ERROR - Failed to get channel options for channel 1.
2005-05-16 14:56:03.601 mythbackend version: 0.17.20050130-1 www.mythtv.org
2005-05-16 14:56:03.601 Enabled verbose msgs : important general
2005-05-16 14:56:04.607 Connecting to master server: 192.168.1.15:6543
2005-05-16 14:56:04.751 Connected successfully
Any ideas of what I could be doing wrong...?
Thanks!
Cheers - Piers
I got as far as getting FE_HAS_LOCK and then couldn't get dvbstream to play anything through mplayer. Anyway, as the signal seemed to be getting through the tuner card OK I decided to go and set up MythTV rather than spend time getting dvbstream working. That worked fine. I'm no expert, but I'd advise skipping the dvbstream bit - assume it's OK as you've got this far and get it configured in MythTV. That's what worked for me!
Regards, Phill
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
