I have as SA3250 and as far as I know, this box does not allow changing channels over the firewire connection. I use an IR Blaster to control it in my setup.
--David Madsen On 5/1/05, Michael Haan <[EMAIL PROTECTED]> wrote: > On 5/1/05, Andy Alsup <[EMAIL PROTECTED]> wrote: > > On 4/30/05, Andy Alsup <[EMAIL PROTECTED]> wrote: > > > Compile instructions from 6200ch-README: > > > > > > # cc -o 6200ch 6200ch.c -lrom1394 -lavc1394 -lraw1394 > > > # cp 6200ch /usr/local/bin > > > > > > If you don't have that file, get the mythtv-0.18 tarball. its in the > > > contrib directory > > > > > > > Although, I don't know if 6200ch works with the SA 3250... > > > > I was wondering the same thing. I was even beginning to wonder if the > SA3250 supports changing channels via FW at all. Anyone know if it > does? Anyway, I modified the source to add my SA's vendor/model and > got the following: > > [EMAIL PROTECTED] contrib # /usr/local/bin/6200ch -v 005 > node 1: vendor_id = 0x00000461 model_id = 0x00000000 > Warning: Unit Spec ID different. > Warning: Unit Software Version different. > AV/C Command: 005 = Op1=0x00487C20 Op2=0x00487C20 Op3=0x00487C25 > > Needless to say, it didn't work. > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
