--- Michael Haan <[EMAIL PROTECTED]> wrote: > On 5/23/05, Mudit Wahal <[EMAIL PROTECTED]> wrote: > > My guess is that you are running AMD 64bit cpu ? > Dont know how well is > > DVB/PCHDTV supported in that. Check out the > pchdtv.com's forum at > > http://www.pchdtv.com > > > > This is what mine shows when I do a find. > > > > 183892 16 -rw-r--r-- 1 root root > 12772 Feb 19 13:56 > > /root/dvb-kernel/firmware/dvb-fe-or51132-qam.fw > > 291985 16 -rw-r--r-- 1 root root > 12772 Apr 11 19:17 > > /usr/lib/hotplug/firmware/dvb-fe-or51132-qam.fw > > > > Thanks > > Mudit > > > > > > > > On 5/22/05, Michael Haan <[EMAIL PROTECTED]> > wrote: > > > Ok, finally, the card loads: > > > > > > cx2388x dvb driver version 0.0.4 loaded > > > cx88[0]: subsystem: 7063:3000, board: pcHDTV > HD3000 HDTV [card=22,autodetected] > > > saa7115: starting probe for adapter cx88[0] > (0x1001b) > > > tuner 1-0061: chip found @ 0xc2 (cx88[0]) > > > tuner 1-0061: type set to 52 (Thomson DDT 7610 > (ATSC/NTSC)) > > > ACPI: PCI Interrupt Link [APC1] enabled at IRQ > 16 > > > ACPI: PCI Interrupt 0000:02:08.2[A] -> Link > [APC1] -> GSI 16 (level, > > > low) -> IRQ 225 > > > cx88[0]/2: found at 0000:02:08.2, rev: 5, irq: > 225, latency: 32, mmio: > > > 0xd9000000 > > > cx88[0]/2: cx2388x based dvb card > > > DVB: registering new adapter (cx88[0]). > > > DVB: registering frontend 0 (pcHDTV HD3000 > HDTV)... > > > > > > > > > But then I get this (I think when trying to scan > channels?): > > > > > > or51132: Waiting for firmware > upload(dvb-fe-or51132-qam.fw)... > > > or51132: No firmware uploaded(timeout or file > not found?) > > > > > > I do have the file: > > > > > > [EMAIL PROTECTED] util # find / -name > dvb-fe-or51132-qam.fw > > > > /usr/lib64/hotplug/firmware/dvb-fe-or51132-qam.fw > > > > > > Not sure if it's in the right place or not, > though. I'm almost there > > > - can anyone help? > > > _______________________________________________ > > > mythtv-users mailing list > > > [email protected] > > > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > There's a link lib -> lib64. Does anyone know for > sure where hotplug > looks? I'll try /lib/firmware.
It depends on the didtro. I think FC3 is FIRMWARE_DIR=/lib/firmware and slackware is FIRMWARE_DIR=/usr/lib/hotplug/firmware Try slocate firmware.agent and then look in that file for the FIRMWARE_DIR
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
