On 5/28/05, Mario Limonciello <[EMAIL PROTECTED]> wrote: > Michael Haan wrote: > > >On 5/24/05, Morten R�nseth <[EMAIL PROTECTED]> wrote: > > > > > >>Gavin, > >> > >>Thanks, adding '"Option "XvmcUsesTextures" "true"' did the trick! > >>However, the frontend hung when I tried doing ff/rew (>3x) after having > >>initiated timestretch to 1.25x. > >>Also, I only get b/wh OSD, but I gather it's that way for everybody. The > >>OSD text is slightly jittery when playing back at normal speed, > >>timestretching seems to smooth that out. > >> > >>Other than that xvmc works great on my fx5200 card. > >> > >> > >>Cheers, > >> > >> > >>-Morten > >> > >>Gavin Haslett wrote: > >> > >> > >> > >>>Yeah, what he said :) > >>> > >>>Also, unless you turn it off by including; > >>> > >>>Option "NoLogo" "true" > >>> > >>>Then you'll get a big NVIDIA splash screen when you start X. If you > >>>haven't specified this and aren't getting the splash screen then you're > >>>not using the accelerated driver. > >>> > >>>-----Original Message----- > >>>From: [EMAIL PROTECTED] > >>>[mailto:[EMAIL PROTECTED] On Behalf Of Tom Dombrosky > >>>Sent: Monday, May 23, 2005 7:32 AM > >>>To: [EMAIL PROTECTED]; Discussion about mythtv > >>>Subject: Re: [mythtv-users] XvMC output not working > >>> > >>> > >>> > >>> > >>>>Pardon me for (maybe) asking the obvious, but how do I know if I'm > >>>>using accelerated nvidia drivers? I'm using 7174. Also, how do I check > >>>> > >>>> > >>>> > >>>>the xvmc libraries are up to date...? > >>>> > >>>> > >>>> > >>>> > >>>Make sure the driver line reads "nvidia" and not "nv" in your xf86config > >>>or xorg.conf file. Also make sure you compiled myth after you installed > >>>the drivers. That way it will use the correct libraries > >>>(7174 as opposed to 7167 or 6629). > >>> > >>>Tom > >>>_______________________________________________ > >>>mythtv-users mailing list > >>>[email protected] > >>>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > >>> > >>> > >>> > >>> > >>-- > >>------------------------------------------------------------------- > >>WEB-fx > >>Morten Lerskau R�nseth http://www.webfx.no > >>Odinsvei 15c mailto:[EMAIL PROTECTED] > >>1413 T�rn�sen Tlf.: (47) 6680 9191 > >>Norway Mob : (47) 9343 4357 > >> > >>_______________________________________________ > >>mythtv-users mailing list > >>[email protected] > >>http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > >> > >> > >> > > > >Having now HD enabled my mythbox, I am interested in getting XvMC to > >work. My rig (FE/BE): > >AMD64 3800+ > >1G RAM > >nVidia 6600GT > >pcHDTV3000 (QAM w/ DVB) > >pvr350 > >2.6.12-rc4 > >nVidia 7174 > > > >It does HD, but runs at ~95%. XvMC has worked before. Sometimes > >it'll work, and then 3 minutes later, not work. I've set > >"XvmcUsesTextures" = "true", but to no avail. Anyone have any ideas? > >_______________________________________________ > >mythtv-users mailing list > >[email protected] > >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > > Pretty identical setup to me here, and pretty identical issues. Did you > compile your box for amd64, or just x86? > > So far, of the people posted into this thread have seemed to have AMD64 > and these same issues. Can someone with 32 bit comment if they have > these issues too? >
AMD64 wherever possible. This is very, very odd. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
