Hi, I recently upgraded from myth 0.15.1 to 0.18.1 and it all works very well, except two very irritating things:
1. The OSI information is 3 hours off, it always show what was on 3 hours ago and not what is currently running. In the Guide screen, all is well again. 2. The preview images are not created any more. In the master mythbackend log I see lots of messages like 2005-05-16 19:49:13.637 Could not open /media/mmedia/mythtv/23_20050516093700_20050516095000.nuv.png. 0 retries remaining. 2005-05-16 19:49:14.153 Couldn't find backend for: : while on the slave backend with the tuner I see 2005-05-30 09:33:07.642 Local file path: /media/mmedia/mythtv/23_20050530073700_20050530075000.nuv 2005-05-30 09:33:08.276 AVFD 2005-05-30 09:33:08.283 AVFD: Opening Stream #0: codec id 2 2005-05-30 09:33:08.286 detectInterlace(Detect Scan, Detect Scan, 25, 576) ->Interlaced Scan 2005-05-30 09:33:08.287 Interlaced: Interlaced Scan video_height: 576 fps: 25 2005-05-30 09:33:08.292 AVFD: Looking for decoder for 2 2005-05-30 09:33:08.303 AVFD 2005-05-30 09:33:08.306 AVFD: Opening Stream #1: codec id 86016 2005-05-30 09:33:08.307 AVFD: Looking for decoder for 86016 2005-05-30 09:33:08.322 Stream #1 (audio track #0) is an audio stream with 2 channels. 2005-05-30 09:33:08.325 Auto-selecting audio track #1 (stream #1). 2005-05-30 09:33:08.327 It has 2 channels and we needed at least 1 2005-05-30 09:33:08.329 Initializing audio parms from audio track #0. 2005-05-30 09:33:08.331 Estimated bitrate = 8320 2005-05-30 09:33:08.354 SyncPositionMap prerecorded, from DB: 0 entries Input #0, mpeg, from '/media/mmedia/mythtv/23_20050530073700_20050530075000.nuv': Stream #0.0: Video: mpeg2video, 720x576, 25.00 fps, 8000 kb/s Stream #0.1: Audio: mp2, 48000 Hz, stereo, 320 kb/s 2005-05-30 09:33:08.394 Commercial Detection initialized: width = 720, height = 576, fps = 25, method = 255 2005-05-30 09:33:08.397 Using Sample Spacing of 6 horizontal & 6 vertical pixels. 2005-05-30 09:33:08.418 CommDetect::ClearAllMaps() 2005-05-30 09:33:08.440 Not enough video to make thumbnail 2005-05-30 09:33:08.442 3 BAD I think most strange is the line not enough video ! I have a split setup with a SuSE9.3 box running the master backend, a SuSE9.3 box a slave backend with PVR 250 and a SuSE9.0 box the frontend. Both backends write via NFS to the same file location hosted on the master. Could it be related to that ? E.g. that backends should have separate file storages ? I actually wanted the master backend to do all the streaming as the slave with the tuner is very weak and has no local HD Thanks for any ideas ! -- Regards, Schlomo
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
