I'm also using Knoppmyth (R5A15.1, downloading R5A16 as we speak)
with a PVR-150 (non-mce) card. I was able to get it to work out of
the box using the composite inputs. All I had to change was the audio
mixer input since I'm not using the tuner, and set the card,
listings, and video sources in mythtv-setup.
S-video input doesnt work yet (on mine it gives etiher black and
white video or it hangs the system.)
I don't konw about using the C key, since as i said i didn't do
anything special and just wanted composite. (well i wanted s-video
but i knew it didnt work)
Nick
On May 30, 2005, at 5:21 PM, Ricardo Kleemann wrote:
Hi,
I've just installed KnoppMyth, with a PVR-150 card.
The way I'm testing it, is with a dvd player connected to the S-
Video port of the PVR-150. However I can't get mythtv to use that
port.
When I go into Watch TV, it always goes into the Tuner 0 port. When
I press 'C' on the keyboard, it doesn't change inputs, it simply
redisplays "1: Tuner 0". One time I was able to get it to go to
Tuner 1, but it never goes to the other inputs. I tried connecting
to the composite video, the S-video, but I can't get mythtv to
actually switch to that tuner.
In mythtv-setup, I even configured the default port to be (at
first) composite 0, then also S-video 0, but that doesn't seem to
make a difference. When I go into Watch TV, it always goes to Tuner 0.
Why is there no response to the 'C' keypress, which should change
inputs?
Thanks
Ricardo
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
