That all looks pretty similar to mine. I'm assuming you can capture ok from the card? If so I would be tempted to ignore the test screen and see what happens if you play a recording or copy from video0 to video16.
John > -----Original Message----- > From: mythtv [mailto:[EMAIL PROTECTED] > Sent: 31 May 2005 19:32 > To: [EMAIL PROTECTED]; Discussion about mythtv > Subject: Re: [mythtv-users] PVR-350 test-image fails > > John Harvey wrote: > > >Is this for PAL or NTSC? > >Sounds like you may be needing PAL but it's configured > >for NTSC? > >I'm not sure what version of ivtv you are using but > >assuming it's recent then you can try adding the > >ivtv_std paramanter to the options to force the > >setting (ivtv_std=2 for pal). > >Note this is from memory since i'm at work but i think > >that is the correct parameter name. > > > >john > >--- mythtv <[EMAIL PROTECTED]> wrote: > > > > > John, I'm using PAL, or rather should do. I use ivtv version 0.2.0 (rc3j). > In my modprobe.conf I have these ivtv parameters: > options ivtv ivtv_std=2 tda9887=0 > > So I guess this ought to do the trick, unless for some reason this line > is not activated. But you might be right, as the ivtv init output > (entire output shown at the end of this reply) first says: > May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting NTSC video Standard > > but then at the very bottom: > May 30 21:52:57 dhcppc3 kernel: ivtv: Switching standard to PAL. > May 30 21:52:57 dhcppc3 kernel: ivtv: ivtv_enc_thread: pid = 2040, itv = > 0xded190a0 > May 30 21:52:57 dhcppc3 kernel: ivtv: ivtv_dec_thread: pid = 2041, itv = > 0xded190a0 > May 30 21:52:57 dhcppc3 kernel: saa7115: decoder set norm PAL > May 30 21:52:57 dhcppc3 kernel: saa7115: set audio: 0x01 > May 30 21:52:57 dhcppc3 kernel: saa7127: Setting Encoder Video Standard > May 30 21:52:57 dhcppc3 kernel: saa7127: Set PAL Video Mode > May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting PAL video Standard > > I have not been able to find others with this problem with this > flickering test image. Normally people either have a blank screen or it > just works :( > > As it has worked for me before, I know the card is o.k., the cabling > also o.k., and the modprobe.conf identical and also the xorg.conf > likewise (presently I am testing with a VGA output xorg.conf though). > > Regards > Mogens > May 30 21:52:57 dhcppc3 kernel: ivtv: ==================== START INIT > IVTV ==================== > May 30 21:52:57 dhcppc3 kernel: ivtv: version 0.2.0 (rc3j) loading > May 30 21:52:57 dhcppc3 kernel: ivtv: Linux version: 2.6.11-1.27_FC3 686 > REGPARM 4KSTACKS gcc-3.4 > May 30 21:52:57 dhcppc3 kernel: ivtv: In case of problems please include > the debug info > May 30 21:52:57 dhcppc3 kernel: ivtv: between the START INIT IVTV and > END INIT IVTV lines when > May 30 21:52:57 dhcppc3 kernel: ivtv: mailing the ivtv-devel mailinglist. > May 30 21:52:57 dhcppc3 kernel: ivtv: Autodetected WinTV PVR 350 card > May 30 21:52:57 dhcppc3 kernel: ivtv: Found an iTVC15 based chip > May 30 21:52:57 dhcppc3 kernel: ACPI: PCI Interrupt Link [LNKB] enabled > at IRQ 11 > May 30 21:52:57 dhcppc3 kernel: ACPI: PCI interrupt 0000:00:09.0[A] -> > GSI 11 (level, low) -> IRQ 11 > May 30 21:52:57 dhcppc3 kernel: ivtv: Unreasonably low latency timer, > setting to 64 (was 32) > May 30 21:52:57 dhcppc3 kernel: ivtv: VIA PCI device: 0x3148 vendor: > 0x1106 > May 30 21:52:57 dhcppc3 kernel: tveeprom: Hauppauge: model = 48139, rev > = K257,serial# = 2932143 > May 30 21:52:57 dhcppc3 kernel: tveeprom: tuner = Philips FM1216 ME MK3 > (idx = 57, type = 38) > May 30 21:52:57 dhcppc3 kernel: tveeprom: tuner fmt = PAL(D/K) (eeprom = > 0x74, v4l2 = 0x00400e17) > May 30 21:52:57 dhcppc3 kernel: tveeprom: audio_processor = CS5331 (type > = 9) > May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=tveeprom[0],ok] > May 30 21:52:57 dhcppc3 kernel: ivtv: Tuner Type 38, Tuner formats > 0x00400e17, Radio: yes, Model 0x00ad2557, Revision 0x00000001 > May 30 21:52:57 dhcppc3 kernel: ivtv: Radio detected > May 30 21:52:57 dhcppc3 kernel: tuner: chip found at addr 0xc2 i2c-bus > ivtv i2cdriver #0 > May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=(tuner unset),ok] > May 30 21:52:57 dhcppc3 kernel: saa7115: starting probe for adapter ivtv > i2c driver #0 (0x10005) > May 30 21:52:57 dhcppc3 kernel: saa7115: detecting saa7115 client on > address 0x42 > May 30 21:52:57 dhcppc3 kernel: saa7115: writing init values > May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=saa7115[0],ok] > May 30 21:52:57 dhcppc3 kernel: saa7115: status: (1E) 0x00, (1F) 0x40 > May 30 21:52:57 dhcppc3 kernel: saa7127: Ignoring new-style parameters > in presence of obsolete ones > May 30 21:52:57 dhcppc3 kernel: saa7127: video encoder driver version V > 0.3 loaded > May 30 21:52:57 dhcppc3 kernel: saa7127: detecting saa7127 client on > address 0x88 > May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting NTSC video Standard > May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting S-Video+Composite > May 30 21:52:57 dhcppc3 kernel: saa7127: Turn WSS off > May 30 21:52:57 dhcppc3 kernel: saa7127: Widescreen Mode 4:3 Full Format > May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting Normal Encoder Input > May 30 21:52:57 dhcppc3 kernel: saa7127: Enable Video Output > May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=saa7127[0],ok] > May 30 21:52:57 dhcppc3 kernel: msp34xx: ivtv version > May 30 21:52:57 dhcppc3 rpcidmapd: rpc.idmapd startup succeeded > May 30 21:52:57 dhcppc3 kernel: msp34xx: init: chip=MSP3418W-B3, has > NICAM support, simple (D) mode, simpler (G) no-thread mode > May 30 21:52:57 dhcppc3 kernel: msp34xx: $Id$ compiled on: May 19 2005 > 04:40:44 > May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=MSP3418W-B3,ok] > May 30 21:52:57 dhcppc3 kernel: tda9885/6/7: chip found @ 0x86 > May 30 21:52:57 dhcppc3 kernel: ivtv: i2c attach [client=tda9887,ok] > May 30 21:52:57 dhcppc3 kernel: ivtv: Encoder revision: 0x02040024 > May 30 21:52:57 dhcppc3 kernel: ivtv: Encoder Firmware may be buggy, use > version 0x02040011 > May 30 21:52:57 dhcppc3 kernel: ivtv: Decoder revision: 0x02020023 > May 30 21:52:57 dhcppc3 kernel: ivtv: Configuring WinTV PVR 350 card > with 9 streams > May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 0 using 256 > 16384 byte buffers 4194304 kbytes total > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 0 minor 0 > May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 1 > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 1 minor 32 > May 30 21:52:57 dhcppc3 kernel: ivtv: Create stream 2 using 40 52224 > byte buffers 2097152 kbytes total > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 2 minor 224 > May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 3 using 455 4608 > byte buffers 2097152 kbytes total > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 3 minor 24 > May 30 21:52:57 dhcppc3 kernel: ivtv: Create stream 4 > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 4 minor 64 > May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 5 using 16 65536 > byte buffers 1048576 kbytes total > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 5 minor 16 > May 30 21:52:57 dhcppc3 kernel: ivtv: Create stream 6 using 1024 2048 > byte buffers 262144 kbytes total > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 6 minor 228 > May 30 21:52:57 dhcppc3 kernel: ivtv: Create stream 7 > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 7 minor 232 > May 30 21:52:57 dhcppc3 kernel: ivtv: Create DMA stream 8 > May 30 21:52:57 dhcppc3 kernel: ivtv: Registered v4l2 device, streamtype > 8 minor 48 > May 30 21:52:57 dhcppc3 kernel: ivtv: Setting Tuner 38 > May 30 21:52:57 dhcppc3 kernel: tuner: type set to 38 (Philips PAL/SECAM > multi (FM1216ME MK3)) by ivtv i2c driver #0 > May 30 21:52:57 dhcppc3 kernel: saa7115: decoder set input (4) > May 30 21:52:57 dhcppc3 kernel: saa7115: now setting Composite input > May 30 21:52:57 dhcppc3 kernel: ivtv: Setting audio matrix to input 3, > output 1 > May 30 21:52:57 dhcppc3 kernel: ivtv: Switching standard to PAL. > May 30 21:52:57 dhcppc3 kernel: ivtv: ivtv_enc_thread: pid = 2040, itv = > 0xded190a0 > May 30 21:52:57 dhcppc3 kernel: ivtv: ivtv_dec_thread: pid = 2041, itv = > 0xded190a0 > May 30 21:52:57 dhcppc3 kernel: saa7115: decoder set norm PAL > May 30 21:52:57 dhcppc3 kernel: saa7115: set audio: 0x01 > May 30 21:52:57 dhcppc3 kernel: saa7127: Setting Encoder Video Standard > May 30 21:52:57 dhcppc3 kernel: saa7127: Set PAL Video Mode > May 30 21:52:57 dhcppc3 kernel: saa7127: Selecting PAL video Standard > May 30 21:52:58 dhcppc3 kernel: ivtv: Initialized WinTV PVR 350, card #0 > May 30 21:52:58 dhcppc3 kernel: ivtv: ==================== END INIT > IVTV ===
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
