try the newer drivers....3.5i is where its at atm....should be better for you
 
www.ivtv.tv 


From: Marty Mastera [mailto:[EMAIL PROTECTED]
Sent: Wednesday, 1 June 2005 8:07 AM
To: Discussion about mythtv
Subject: [mythtv-users] PVR-500 replacing WinTV, randomly rebooting

Hello,
 
I have been running Myth 0.17 on a Soyo K7VME mobo and a WinTV PCI card.  This system is normally only used as a backend for an xbox frontend.  I recently replaced the WinTV card with a PVR-500MCE.  All I did was remove the WinTV card and replace it with the PVR-500 card, then followed instructions to download ivtv 0.3.2s and configure it.
 
I then removed the WinTV card from mythsetup and added two capture cards, one for each tuner on the 500.  All of the functionality is working good (ie I can watch live tv, record two shows at once, etc, etc) but the machine randomly reboots itself every so often.  It only seems to happen when one or more of the tuners are in use (ie during live TV) and seems to possibly happen more quickly if I change channels alot.  In general the audio is working great but it seems like on certain channels (or possibly on every channel but only right before it decides to reboot) I notice some slight audio distortion  I have heard of people having trouble with VIA chipsets, but I have read posts where people have had success with the KM400 chipset. I have tried the PVR-500 in a different slot, installed the newest BIOS, verifed that the reboots will occur whether or not the xbox is involved, tried to make sure things are using unique IRQs, etc...here are a couple of questions:
 
1) Can anyone tell me which modules should be loaded and running for a PVR-500?  I'm wondering if the sytem is still loading modules for the old WinTV card...I see references to bttv in the dmesg output.
 
2) Is anyone else using this motherboard with a PVR-150 or PVR-500?  If so what are your experiences
 
3) Besides adding the new tuner cards and mapping sources, etc...in the mythsetup, is there anything on the backend that I would have needed to switch after I install this card?
 
 
 
 
 
Marty
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users

Reply via email to