thank you for the reply, If that parameter is not longer necessary then I am truely at a loss. When that parameter is not set I get no errors at all, but a cat /dev/video0 > test.mpg yeilds only static.
I am running ivtv-0.3.5t I figured the later the driver the better the 150 support might be. If I could get your set_ivtv_params and ivtv module lines then maybe I can narrow the playing field a bit. Is your tuner 47 as well? from what I understand the tuner can be 47,50, 39... But it was also my understanding that it is auto detected now so tuner = xx no longer applies as well. I feel that I am close now... my IVTV output from dmesg: Linux video capture interface: v1.00 tuner: Ignoring new-style parameters in presence of obsolete ones saa7115: starting probe for adapter SMBus Via Pro adapter at 5000 (0x0) ivtv: ==================== START INIT IVTV ==================== ivtv: version 0.3.5 (t) loading ivtv: Linux version: 2.6.11.9-chw-2 SMP preempt 586 gcc-3.3 ivtv: In case of problems please include the debug info ivtv: between the START INIT IVTV and END INIT IVTV lines when ivtv: mailing the ivtv-devel mailinglist. ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3116 vendor: 0x1106 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7954869 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00892598, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected cx25840: starting probe for adapter SMBus Via Pro adapter at 5000 (0x0) cx25840: starting probe for adapter ivtv i2c driver #0 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: writing init values cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 0 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 32 ivtv: Create DMA stream 1 using 80 25920 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 224 ivtv: Create DMA stream 2 using 165 12635 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 24 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 64 ivtv: Create stream 4 ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #0 cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #0 ivtv: Autodetected WinTV PVR 150 card ivtv: Found an iTVC16 based chip ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18 ivtv: Unreasonably low latency timer, setting to 64 (was 32) ivtv: VIA PCI device: 0x3116 vendor: 0x1106 tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #1 ivtv: i2c attach [client=(tuner unset),ok] saa7115: starting probe for adapter ivtv i2c driver #1 (0x10005) tveeprom: Hauppauge: model = 26552, rev = B268, serial# = 7954696 tveeprom: tuner = LG TAPE H001F MK3 (idx = 68, type = 47) tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000) tveeprom: audio_processor = MSP3410D (type = 5) ivtv: i2c attach [client=tveeprom[50],ok] cx25840: starting probe for adapter ivtv i2c driver #1 (0x10005) cx25840: detecting cx25840 client on address 0x88 cx25840: writing init values ivtv: ivtv_enc_thread: pid = 2777, itv = 0xe0bdf3a0 ivtv: ivtv_enc_vbi_thread: pid = 2778, itv = 0xe0bdf3a0 cx25840: FW image '/lib/modules/HcwMakoA.ROM' of size 14264 loaded. cx25840: FW image md5 digest: 3a4803384f749d644ee1f1ca9dcb12fa cx25840: FW image sha1 digest: 2b5e6292b7391c980b93d156cf6b34178ce770f6 cx25840: Status: cx258433 (DEVICE_ID) ivtv: i2c attach [client=cx25840[50],ok] ivtv: i2c attach [client=wm8775[50],ok] tda9885/6/7: chip found @ 0x86 ivtv: i2c attach [client=tda9887,ok] ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model 0x00892598, Revision 0x00000001 ivtv: NTSC tuner detected ivtv: Radio detected ivtv: Encoder revision: 0x02040011 ivtv: Configuring WinTV PVR 150 card with 5 streams ivtv: Registered v4l2 device, streamtype 0 minor 1 ivtv: Create DMA stream 0 using 128 16384 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 1 minor 33 ivtv: Create DMA stream 1 using 80 25920 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 2 minor 225 ivtv: Create DMA stream 2 using 165 12635 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 3 minor 25 ivtv: Create DMA stream 3 using 455 4608 byte buffers 0 kbytes total ivtv: Registered v4l2 device, streamtype 4 minor 65 ivtv: Create stream 4 ivtv: Setting Tuner 47 tuner: type set to 47 (LG NTSC (TAPE series)) by ivtv i2c driver #1 cx25840: decoder set norm NTSC cx25840: decoder set input (6) cx25840: now setting Tuner input cx25840: set audio input (0) ivtv: Switching standard to NTSC. ivtv: Initialized WinTV PVR 150, card #1 ivtv: ==================== END INIT IVTV ==================== cx25840: decoder set size 720x480 (from 720x480) -> scale 0x65536, filter 0 ivtv: ivtv_enc_thread: pid = 2844, itv = 0xe0c026e8 ivtv: ivtv_enc_vbi_thread: pid = 2845, itv = 0xe0c026e8 cx25840: decoder set size 720x480 (from 720x480) -> scale 0x65536, filter 0 cx25840: decoder disable output cx25840: decoder set input (7) cx25840: now setting Tuner input cx25840: decoder enable output cx25840: decoder set norm NTSC cx25840: decoder set input (7) cx25840: now setting Tuner input cx25840: set audio input (0) On Fri, 2005-06-03 at 08:40 -0700, Mark Knecht wrote: > Dan, > Maybe I'm not seeing it but I cannot tell what version of ivtv you > are running. On newer versions of ivtv no_black_magic is no longer a > valid parameter. > > We have a PVR-150 in a Gentoo-based backend here. We are running > ivtv-0.3.5p from the development donwload site. All we do to run it is > this in /etc/conf.d/local.start > > modprobe tveeprom > modprobe ivtv > > ivtv will not earlier in the boot sequence for us so sticking it in > loacl.start was acceptable and is working fine. Everything about the > newer drivers seems to be working well for us. > > Hope this helps. If you need more info feel free to write back on > the list or directly. > > Cheers, > Mark > > On 6/3/05, Dan H Orlic <[EMAIL PROTECTED]> wrote: > > 2 PVR-150 in system-- > > > > Ok, from all the mailing lists I have seen it looks like this is what is > > comes down to: > > > > ivtv: Tuner Type 47, Tuner formats 0x00001000, Radio: yes, Model > > 0x00892598, Revision 0x00000001 > > ivtv: NTSC tuner detected > > ivtv: Radio detected > > cx25840: Unknown parameter `no_black_magic' > > ivtv: Failed to load module cx25840 > > > > apparently that no_black_magic parameter is key to the 150 working (When > > I comment it out all i get is static) > > > > my problem is all the solutions out there say to upgrade the kernel but > > i am running: > > > > [EMAIL PROTECTED]:~# uname -a > > Linux mythtv 2.6.11.9-chw-2 #1 SMP Sat May 14 12:11:44 CDT 2005 i686 > > GNU/Linux > > > > Will a force install of 2.6.11.11 do the trick? I'd hate to download a > > kernel tarball and try to figure out all the config options that > > knoppmyth set for optimizing mythtv. > > > > Please help, I feel that this is the last hurdle to clear before getting > > my system up and running! More info below: > > > > [EMAIL PROTECTED]:~# more /etc/init.d/set_ivtv_params > > /usr/local/bin/ivtvctl -d /dev/video0 -u 0x3000 -f width=720,height=480 > > -p 6 > > #/usr/local/bin/ivtvctl -d /dev/video0 -c > > dnr_mode=0,dnr_temporal=4,dnr_spatial=4 > > #/usr/local/bin/ivtvctl -d /dev/video0 -x 0 > > > > /usr/local/bin/ivtvctl -d /dev/video1 -u 0x3000 -f width=720,height=480 > > -p 7 > > #/usr/local/bin/ivtvctl -d /dev/video1 -c > > dnr_mode=0,dnr_temporal=4,dnr_spatial=4 > > #/usr/local/bin/ivtvctl -d /dev/video1 -x 0 > > [EMAIL PROTECTED]:~# > > > > [EMAIL PROTECTED]:~# more /etc/mythtv/modules/ivtv > > alias char-major-81 videodev > > alias char-major-81-0 ivtv > > alias char-major-81-1 ivtv > > alias char-major-61 lirc_i2c > > > > options cx25840 no_black_magic=1 > > options ivtv ivtv_std=0 tda9887=0,0 ivtv_debug=1 > > > > options cx25840 i2c_enable=1 > > options saa7127 i2c_enable=-1 > > options msp3400 once=1 simple=1 > > > > > > > > > > install ivtv /sbin/modprobe tuner; /sbin/modprobe > > msp3400; /sbin/modprobe saa7115; /sbin/modprobe --ignore-install ivtv > > remove ivtv /sbin/modprobe -r --ignore-remove ivtv && /sbin/modprobe -r > > saa7115 > > && /sbin/modprobe -r msp3400 && /sbin/modprobe -r tuner > > [EMAIL PROTECTED]:~# > > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > mythtv-users mailing list > > [email protected] > > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
