I've added PVR150MCE to my PVR350. Modules are configured, I can do: cat /dev/video0 > /tmp/test0.mpg cat /dev/video1 > /tmp/test1.mpg even at the same time from two different xterms, and they record video, two different channels. I run mythtv-setup, I can add the second capture card (there is no PVR150 option in setup, I used the same option as for PVR350). Setup sees two tuners on 150MCE, not one. I can link both to the same video lineup as the 350, or link only one and leave the second as "None", does not seem to make much difference for what happens next.
I launch the frontend and go to Watch TV. I hit "C", and after a short delay nothing happens. I tried "V", nothing happens as well. The strange thing is, I'm watching from 150MCE tuner and cannot switch to the 350 tuner (which worked just fine before). There's nothing illuminating in the backend log, frontend log has this: 2005-06-05 12:18:42.001 Connecting to backend server: 192.168.1.15:6543 (try 1 of 5) 2005-06-05 12:18:42.009 Using protocol version 15 2005-06-05 12:18:42.039 Using protocol version 15 2005-06-05 12:18:46.358 Opening audio device 'default'. Using XvMC version: 1.0 XvMC found and using IDCT surface 2005-06-05 12:18:46.407 Using XV port 177 2005-06-05 12:18:46.447 Couldn't get the color key color, and we need it. You likely won't get any video. 2005-06-05 12:18:46.671 Realtime priority would require SUID as root. 2005-06-05 12:18:46.693 Changing from None to WatchingLiveTV 2005-06-05 12:18:46.786 Video timing method: RTC <========= I press "C", video freezes ===========> 2005-06-05 12:18:55.799 Waited too long for ringbuffer pause.. 2005-06-05 12:19:02.044 prebuffering pause 2005-06-05 12:19:04.686 prebuffering pause <========= Video resumes, same tuner ===========> 2005-06-05 12:19:06.268 Waited too long for ringbuffer pause.. 2005-06-05 12:19:06.553 Couldn't get the color key color, and we need it. You likely won't get any video. The only other thing which might be relevant I can see in the system log. When I manually capture video from PVR350 I see this show up: Jun 5 13:01:42 myth kernel: ivtv: Allocate DMA stream 0 using 128 16384 byte buffers 2097152 kbytes total Jun 5 13:01:42 myth kernel: ivtv: Setup VBI API header 0x0000bd0d pkts 1 buffs 4 ln 24 sz 1444 Jun 5 13:01:42 myth kernel: ivtv: Setup VBI start 0x0018ea04 frames 4 fpi 1 lines 0x000000f1 Jun 5 13:01:43 myth kernel: saa7115: decoder disable output Jun 5 13:01:43 myth kernel: saa7115: decoder enable output When I capture from PVR150 I don't get the last 2 lines about saa7115. When mythfrontend is running, I also get only the first 3 lines, saa7115 is not mentioned. Any suggestions? -- Fedor G Pikus ([EMAIL PROTECTED]) http://www.pikus.net http://wild-light.com _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
