On 6/7/05, jani <[EMAIL PROTECTED]> wrote: > After months of putting up with fuzzy looking lines or blocky looking > diagonals I have managed to make the output of my FX5200 look as nice > as the output from my dvd player. > > I am in Australia, so receive PAL SDTV using a DVB-T card at a > resolution of 720x576 and at 50Hz. This works with the nvidia 1.0-7174 > driver. > > Up until now I had followed the directions in the nvidia readme, and > configured the xorg.conf to output the default 800x600 picture but > with output selected to SVIDEO. (the 1024x768 resolution also worked > but looked fuzzier to me). > > Attached is my current xorg.conf. > > The important changes are: > modeline for 720x576 at 50 Hz (if you need an ntsc modeline generate > it with gtf) > > This means that the tv-output stage of the card doesn't do any scaling > and so so it looks like the interlaced frames actually make it to the > screen with minimal quality loss. > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >
I have never been able to get a modeline generator working through my S-Vid out. I took another drive and installed Windows on it and tried the PowerStrip route. The picture didn't change at _all_. Could it have something to do with the S-Vid running through my receiver to my TV? _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
