And you can get dvb-apps from http://www.linuxtv.org. Don't just download the tarball in the downloads directory however. Make sure you get the dvb-apps tree from CVS, as that's much more up-to-date.
-Bruce Rich Goodin wrote: > I'm using 2.6.11-1.27_FC3 > > and use: --enable-dvb --dvb-path=/usr/include > > Rich Goodin > > On Jun 9, 2005, at 7:54 AM, Mercury Morris wrote: > >> In mythtv-setup, I tried to add an HD-3000 card as a >> Digital Video Broadcast (DVB) device. In the center >> of the screen was a line telling me to recompile with >> DVB support. >> >> Yesterday, when I compiled mythtv (0.18.20050523-1) >> I noticed that make --help showed --dvb-path. So, I >> Googled around, but didn't find a solid answer, and left >> out both --enable-dvb AND --dvb-path. Bad idea. >> >> So, now I must recompile mythtv, but what is the value >> to use for --dvb-path ? I should also ask about where >> and how to get/install dvb-apps, assuming I can figure >> out what to use for dvb-path. >> >> The kernel is 2.6.12-rc6, with all the Video Adapters >> compiled as modules, including CX88_DVB. >> There is also a PVR-350 card installed and working, >> using ivtv-0.3.6e. >> >> If you are using a 2.6.12 kernel and have compiled >> mythtv with DVB support, would you post what you >> used for dvb-path ? _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
