First, thanx for the responce Greg. Actually, I have Over the Air Digital ATSC (in the States, pulling from a Digital Antenna). And the tuner card is actually working as I am able to pull up a picture using mplayer /dev/video2 . The tuner card/driver (which is the cx88-atsc driver) seems to be working fine. The issue 'appears' to be something myth related in this kernel/driver configuration. Otherwise I don't know why I can view TV from mplayer accessing this tuner card ( I just have to change channels by issuing a 'dtvsignal /dev/video2 <channel number>' command). Myth seems to see the card, but can't find the inputs (i.e. Television, Composite, S-Video). Kinda strange.
By the way, the same box, booting a 2.6.8 kernel, works fine with myth, but I have to use the HD-3000 1.5 drivers to compile on this kernel. -Blair Greg Woods ([EMAIL PROTECTED]) wrote: > > On Thu, 2005-06-09 at 12:15 -0600, Blair Preston wrote: > > > When I try to configure myth to these video inputs I get; > > > > ERROR: no inputs found > > > > anyone have any ideas? > > This sounds remarkably like the three-day headache I just went through. > If you do not have digital cable, you must use the V4L drivers, not DVB > and not those explicitly labeled for the PCHDTV-3000 (because those are > just early versions of DVB). The DVB drivers are for digital inputs > only; if you've got analog cable (and I expect you do if /dev/video > devices work), you need to configure MythTV to use the V4L drivers. > > --Greg > > > _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
