Yup wilsons guide is a good start for setting up but a bit confusing at
times.
no real troubleshooting on what to do if/when etc.
I'm on my third install, and have highlighted items to do and crossed out
areas that don't apply.
If I can't get a working install this time around, I'll give knoppix one
last try then sadly, I'll have to use a windows based solution for a while.
this is a real beast to install and get working, ... good luck we all need
it.
----------------------------------------------------
This mailbox protected from junk email by MailFrontier Desktop
from MailFrontier, Inc. http://info.mailfrontier.com
----- Original Message -----
From: "Jim Reith" <[EMAIL PROTECTED]>
To: "Fedor Pikus" <[EMAIL PROTECTED]>; "Discussion about mythtv"
<[email protected]>
Sent: Sunday, June 19, 2005 6:38 AM
Subject: Re: [mythtv-users] Configuration problem with PVR-350 andGeForce2
with tv out
Ok, if I do a modprobe ivtv-fb it seems to find and configure the
card properly but when I try to put it into my ivtv modules file, it
hangs when booting right after configuring bttv. I'll have to play
with it more as I have family things to do today so I can't fiddle as
much as this will need at the moment.
Thanks for the pointer. Somehow I had missed the ivtv-fb when I went
through it previously
Fedor Pikus <[EMAIL PROTECTED]> wrote:
fbdev is actually framebuffer driver for NVidia cards, so it does the
right thing when it shows PCI ID of your GeForce. You want ivtv-fb
module. Make sure you read the PVR350 section of Jarod's Howto for all
the ivtv parameters:
http://wilsonet.com/mythtv/fcmyth.php?SID&expandables=closed&ivtv=open&pvr350out=open#capture
On 18 Jun 2005 17:36:55 -0700, Jim Reith <[EMAIL PROTECTED]> wrote:
I've set up a KnoppMyth box that includes an AGP GeForce2 card with TV
out
and a PVR-350 and want to output my video through the PVR-350 tv out.
I'm
new to KnoppMyth (but not linux) and have been playing with this new
machine
for about a week now, have looked at all the PRV-x50 notes and think I
have
figured out the problem but not a solution. I believe I am having
problems
because my AGP graphics card has video out and I want to use the 350's
video
out. (note, the IR Remote also isn't working but I think that might be
partially due to this pvr-350 setup issue) The error I get starting the
X
server is:
(EE) open /dev/fb1: No such device
(EE) No devices detected.
Just above this in the log I see
(II) FBDEV: driver for framebuffer: fbdev, afb
> (II) Primary Device is: PCI 03:00:0
--------------------------------------------------------------------------------
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
