At 11:01 AM 6/27/2005, you wrote:
Jim Reith wrote:
At 10:30 AM 6/27/2005, you wrote:
you dont have to do anything with the 150's remote. the 350's remote will
control whichever card you are using for live tv at the time with no extra
configuration.
Through the 350's IR input or do I hook up both cards IR receivers? I just
had this image of changing remotes depending on the card in use or clicking
on the remote and changing the tuner for something recording in the
background.
The remote doesn't talk to the PVR-350. LIRC is receiving the input from
the remote and sending it to MythTV. MythTV changes the channel.
Since MythTV can change channels on both tunners (you can do it with the
keyboard, so you know the remote isn't involved), you only need to pick
one of the IR receivers and use the remote in conjunction with that.
Duh, dawn breaks over Marblehead. Yes, that makes sense. I configure the
remote to work (as it does now) and there is logic in MythTV as to which
tuner is active with the foreground and acts on the commands. I was just
having a block on the fact that the software was handling the remote not
hardware on the tuner. I should have known that after all the work to
generate lirc.conf and lircrc last week.
Kevin
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
