I recently purchased a Samsung HLR4667W widescreen DLP television and have been trying to get my MythTV box to work nicely with it via its VGA input. Since the monitor's native resolution is 1280x720, I used the following modeline to generate a decent picture:
1280x720 74.863 1280 1360 1488 1664 720 723 730 750 While that displays a very nice picture, it is overscanned both horizontally and vertically. Using Powerstrip, I was able to eliminate most of the horizontal overscan after generating this mode: 1280x720 79.159 1280 1424 1552 1760 720 723 730 750 Now, I need to create a "resolution within a resolution" to eliminate most of the vertical overscan, but I'm at a loss to do so. Following the instructions on the AVS Fourm link found in Jarod's HDTV FAQ, every mode that I try to create results in my display saying that the mode is not supported. I've determined that a 1228x690 mode should fit the display almost perfectly, but can't get it to work. Any of the modeline experts on this list care to give me a hand? Thanks, Nate _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
