On 6/29/05, john sturgeon <[EMAIL PROTECTED]> wrote: > On 6/27/05, Robert Tsai <[EMAIL PROTECTED]> wrote: > > > > Just following up on this. > > > > Problem: > > > > My setup is such that I "learn" the 15-2116 volume buttons > > from my HT-in-a-box remote. > > > > However, holding down the 15-2116 volume buttons doesn't give > > me a corresponding volume adjustment; I only get a single > > "tick" of volume adjustment. > > > > I want to make the 15-2116 volume button work like my > > HT-in-a-box remote (e.g., hold down volume buttons for > > multiple ticks of volume adjustment). > > > > Solution: > > > > Don't be so timid with the learning process :). > > > > I was previously just tapping my HT-in-a-box remote volume > > button just once to learn the remote. > > > > Instead, I just held down the HT-in-a-box remote volume button > > for the entire "learning" time period. > > > > Now the volume buttons are working perfectly, and with JP1 and > > RemoteMaster, the rest of the remote is great as well :). > > > > Hope this helps someone else, > > --Rob > > > > Rob, > > Thanks so much for following up on this. All to many times people > find the answer and don't come back to the forum to post it. I'm > going to try this tonight and let you know how it goes. > > -- > John <>< >
Final follow up. It worked! It turns out my source remote emits two seperate IR codes, one signal first which is one tick of the volume, then a slight (~100ms) pause, then the repeating signal. The procedure I used to learn the proper code was to set my 15-2116 to learn, then point my source remote away, and press and hold the key, then after a second turn my source remote at my 15-2116.. Viola. Thanks again Rob, -- John <>< _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
