On 7/1/05, Michael T. Dean <[EMAIL PROTECTED]> wrote: > PAUL WILLIAMSON wrote: > > >>>>[EMAIL PROTECTED] 07/01/05 8:39 AM >>> > >>>> > >>Using the how to on wilsonnet.com, I was able to > >>setup my PVR-250 to capture and dispaly cable tv > >>video and it worked perfectly. It was fine. > >> > >>After I ran Mythtvsetup. I am no longer to able to > >>display cable tv video. and when I the system now > >>thanks it is a PVR150 instead of a PVR250 > >> > >>[EMAIL PROTECTED] ~]# /bin/dmesg |grep Initialized > >>ivtv: Initialized WinTV PVR 150, card #0 > >> > >>what happend and what do I do?
I believe that this is fixed in ivtv CVS. I'm using 0.3.6p with a patch. I have both a 150 and a 250 in the same box and they are now recognized correctly, but only from a cold boot. I had the same problem where the 150 wasn't recognized and the 250 was seen as a 150. In my system they are not recognized from a warm boot as something is messing up the PCI subsystem vendor id. Please run the command: /sbin/lspci -xx from a cold boot and a warm boot and post back the data for your 250. This will help us tell if it's the same problem. - Mark _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
