Dear users, I am very experienced with Linux, but brand new with Mythtv.
I am using a PVR-250 card. This card works fine under linux, using the appropriate drivers (ie I can see the video input in a window using mplayer -vo xv /dev/video0). I did the configuration using mythtvsetup, as described in the howto. I did configure the mpeg-2 encoders in the front-end. But LiveTV does not work, the front-end complains with : 2005-07-02 00:14:22.041 Changing from None to WatchingLiveTV 2005-07-02 00:14:22.075 Unknown video codec 2005-07-02 00:14:22.075 Please go into the TV Settings, Recording Profiles and 2005-07-02 00:14:22.075 setup the four 'Software Encoders' profiles. 2005-07-02 00:14:22.076 Assuming RTjpeg for now. 2005-07-02 00:14:22.076 NVR: Error, unknown audio codec 2005-07-02 00:14:22.087 NVR: Won't work with the streaming interface, falling back VIDOCGMBUF:: Argument invalide 2005-07-02 00:14:22.091 TVRec: Recording Prematurely Stopped I tried to look for these "Software Encoders", but I do not have any of those. I only see "MPEG-2 Encoders (PVR-250,PVR-350)" and "Encodeurs". What should I do ? Thx, Frederic. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
