Hi,
This patch doesn't seem to work for me. It applied to svn
revision 6759 with only a little fuzz. Normal Myth stuff works
fine. When I hit 'T', I see "TXT on" on the screen, but I get no text.
Here is the backend log while recording:
2005-07-02 16:58:04.732 DVB#0 Recorder: Card opened successfully
(using TS mode).
2005-07-02 16:58:04.732 DVB#0 AutoPID for ServiceID=769, PCRPID=161
(0xa1)
2005-07-02 16:58:04.747 DVB#0 AutoPID selecting PID 161 (0xa1),
MPEG-2 Video (eng
2005-07-02 16:58:04.747 DVB#0 AutoPID selecting PID 81 (0x51), MPEG-1
Audio (eng
2005-07-02 16:58:04.748 DVB#0 AutoPID selecting PID 41 (0x29),
Teletext (eng
2005-07-02 16:58:04.748 DVB#0 AutoPID skipping PID 900 (0x384), Data
2005-07-02 16:58:04.749 DVB#0 AutoPID skipping PID 500 (0x1f4),
Unknown type: 5
2005-07-02 16:58:04.749 DVB#0 AutoPID Complete - PAT/PMT Loaded for
service
2005-07-02 16:58:04.749 DVB#0 Service is FTA
2005-07-02 16:58:04.750 DVB#0 Adding pid 161 (0xa1)
2005-07-02 16:58:04.750 DVB#0 Adding pid 81 (0x51)
2005-07-02 16:58:04.754 DVB#0 Adding pid 41 (0x29)
2005-07-02 16:58:04.754 DVB#0 Data read from DMX - This is for
debugging with transform.c
2005-07-02 16:58:05.622 DVB#0 Found keyframe
2005-07-02 16:58:05.631 DVB#0 Found PUSI for PID 161
2005-07-02 16:58:05.633 DVB#0 Found PUSI for PID 81
2005-07-02 16:58:05.640 DVB#0 Found PUSI for PID 41
It seems that it is recording a Teletext stream. Is this the right
stream, or are things different here in Aus? I also note that it
skips two streams. Are those needed?
Thanks for any help,
Will :-}
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
