Nick, Interesting possibility for another alias.. I'll try it.
I'm also wondering if the 250 should be the first card? I haven't captured from the command line for either card.. but They're both working perfectly from within MythTV. I can record 2 separate programs, watch live tv on 2 separate frontends, record 2 separate programs etc.. Do I need to try the command line at this point? - Michael > From: Nick <[EMAIL PROTECTED]> > Reply-To: Nick <[EMAIL PROTECTED]>, Discussion about mythtv > <[email protected]> > Date: Sat, 9 Jul 2005 03:17:33 +0100 > To: Discussion about mythtv <[email protected]> > Subject: Re: [mythtv-users] Help with lirc_i2c - nothing happens.. > > On 7/9/05, Michael Jones <[EMAIL PROTECTED]> wrote: >> I've got this thing *almost* working. >> >> One exception though.. lirc_i2c >> >> I have 2 separate hauppauge controllers.. a PVR150MCE and a PVR250. I'm >> trying to use the remote for the PVR250 (which is the second card, the 150 >> is 0 and the 250 is 1) >> >> Everything with lirc seems to start and work correctly, but when I use the >> /usr/bin/irw program to check communication nothing works. >> >> Here's my modrobe.conf file >> >> alias char-major-61 lirc_i2c >> alias eth0 r8169 Gigabit Ethernet driver 1.1.2 >> alias eth1 sis900 >> alias snd-card-0 snd-intel8x0 >> options snd-card-0 index=0 >> install snd-intel8x0 /sbin/modprobe --ignore-install snd-intel8x0 && >> /usr/sbin/alsactl restore >/dev/null 2>&1 || : >> remove snd-intel8x0 { /usr/sbin/alsactl store >/dev/null 2>&1 || : ; }; >> /sbin/modprobe -r --ignore-remove snd-intel8x0 >> alias usb-controller ehci-hcd >> alias usb-controller1 ohci-hcd >> # nvidia kernel module >> alias char-major-195 nvidia-1_0-7174 >> alias nvidia nvidia-1_0-7174 >> # ivtv (PVR-150MCE) >> alias char-major-81 videodev >> alias char-major-81-0 ivtv >> alias tveeprom tveeprom-ivtv >> alias tuner tuner-ivtv >> alias msp3400 msp3400-ivtv >> #options cx25840 no_black_magic=1 >> install lirc_i2c /sbin/modprobe ivtv; /sbin/modprobe --ignore-install >> lirc_i2c >> >> I've followed wilson.net instructions and even double/triple/quadruple >> checked everything and can't seem to find an issue.. >> >> I'm using the control file from the web site for the grey and black (older?) >> remote.. >> >> Any help would be appreciated. >> >> - Michael > > I have a feeling you may need another alias definition for the second > (PVR-250) capture card in your modprobe.conf: > > alias char-major-81-1 ivtv > > I have a feeling that the i2c module will not work without a suitable > ivtv module being attached to the card, but could be (and likely are) > wrong! Can you capture from the command line from both cards now? > > Nick > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
