Make sure you have the correct firmware from the correct directory on the CD. I beat my head against the wall for days until I tried the firmware on the CD. The one you extract from the latest dirvers on their website never worked for me.
-Khanh > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Ricardo Kleemann > Sent: Saturday, July 09, 2005 5:34 PM > To: Discussion about mythtv > Subject: [mythtv-users] help with PVR 150 > > Hi, > > I've just installed mythtv on a FC4 system. I have a PVR150 > card, and I > installed the latest ivtv-0.3.6w modules, kernel 2.6.11-1.1369 > > I see the modules loaded after I run modprobe ivtv, however > it doesn't seem > that the PVR150 is doing anything. > > I'd expect to be able to run mplayer /dev/video0 or even a > cat /dev/video0 > > test.mpeg and see some static (nothing is yet connected to the card). > > But mplayer does nothing, and the test.mpeg file is 0 bytes. > > I'm not familiar with ivtv or ivtvctl, but what should I do > to get the > PVR150 going? Running ivtvctl -a reports the card as a PVR > 250, which is > not correct. > > Any help would be appreciated! > > Thanks > Ricardo > > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users >
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
