I gave it a try and it still has the same problem. the one thing I did notice is this
This is mine: cat /var/log/messages |grep "iTVC15 TV out" Jul 10 17:12:16 localhost kernel: ivtv-osd: fb1: iTVC15 TV out frame buffer device This is Jarod's: cat /var/log/messages |grep "iTVC15 TV out" Feb 7 21:17:39 htpc kernel: fb1: iTVC15 TV out frame buffer device This is the only difference I can see. I assume mine says localhost because I have yet to set up a localhost name, but why does mine say ivtv-osd? Is this because it is a newer version? Thanks, marc --- "Claude Gélinas agr." <[EMAIL PROTECTED]> wrote: > Le dimanche 10 juillet 2005 à 14:56 -0700, Marc > Maniscalco a écrit : > > Long time read, first time writer. > > > > I have decided to take the plung since I can no > longer > > get DirecTv at my new house. Mother Nature > strikes > > again. > > > > I am of course following Jarod's instruction. > > Everything so far works except I can't get X > working > > through the 350. It does capture and pla on the > 350's > > output. I have a geforce MX in the AGP slot > running > > to a monitor and then the 350 TV out is pluged in > to a > > TV. > you have to edit your xorg.conf to get X via the > pvr350 to the tv > > Here is my config to do that: > > > -------------- > > # XFree86 4 configuration created by pyxf86config > > Section "ServerLayout" > Identifier "Default Layout" > Screen 0 "Screen0" 0 0 > InputDevice "Mouse0" "CorePointer" > InputDevice "Keyboard0" "CoreKeyboard" > EndSection > > Section "Files" > > # RgbPath is the location of the RGB database. > Note, this is the name > of the > # file minus the extension (like ".txt" or ".db"). > There is normally > # no need to change the default. > # Multiple FontPath entries are allowed (they are > concatenated together) > # By default, Red Hat 6.0 and later now use a font > server independent of > # the X server to render fonts. > RgbPath "/usr/X11R6/lib/X11/rgb" > FontPath "unix/:7100" > EndSection > > Section "Module" > Load "dbe" > Load "extmod" > Load "fbdevhw" > Load "glx" > Load "record" > Load "freetype" > Load "type1" > Load "dri" > EndSection > > Section "InputDevice" > > # Specify which keyboard LEDs can be user-controlled > (eg, with xset(1)) > # Option "Xleds" "1 2 3" > # To disable the XKEYBOARD extension, uncomment > XkbDisable. > # Option "XkbDisable" > # To customise the XKB settings to suit your > keyboard, modify the > # lines below (which are the defaults). For > example, for a non-U.S. > # keyboard, you will probably want to use: > # Option "XkbModel" "pc102" > # If you have a US Microsoft Natural keyboard, you > can use: > # Option "XkbModel" "microsoft" > # > # Then to change the language, change the Layout > setting. > # For example, a german layout can be obtained with: > # Option "XkbLayout" "de" > # or: > # Option "XkbLayout" "de" > # Option "XkbVariant" "nodeadkeys" > # > # If you'd like to switch the positions of your > capslock and > # control keys, use: > # Option "XkbOptions" "ctrl:swapcaps" > # Or if you just want both to be control, use: > # Option "XkbOptions" "ctrl:nocaps" > # > Identifier "Keyboard0" > Driver "kbd" > Option "XkbModel" "pc105" > Option "XkbLayout" "ca_enhanced" > EndSection > > Section "InputDevice" > Identifier "Mouse0" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/input/mice" > Option "ZAxisMapping" "4 5" > Option "Emulate3Buttons" "yes" > EndSection > > Section "Monitor" > Identifier "NTSC Monitor" > HorizSync 30.0 - 68.0 > VertRefresh 50.0 - 120.0 > ModeLine "720x480" 34.6 720 752 840 928 > 480 484 488 504 - > hsync -vsyn > c > EndSection > > Section "Device" > > ### change fb1 to whatever your card grabbed > ### converted from hex to decimal > Identifier "Hauppauge PVR 350 iTVC15 > Framebuffer" > Driver "ivtvdev" > Option "fbdev" "/dev/fb1" > Option "ivtv" "/dev/fb1" > ### change the BusID to whatever is reported > by lspci, > BusID "PCI:5:6:0" > EndSection > > Section "Screen" > Identifier "Screen0" > Device "Hauppauge PVR 350 iTVC15 > Framebuffer" > Monitor "NTSC Monitor" > DefaultDepth 24 > DefaultFbBPP 32 > SubSection "Display" > Depth 24 > FbBPP 32 > Modes "720x480" > EndSubSection > EndSection > > Section "DRI" > Group 0 > Mode 0666 > EndSection > -------------------- > > you will have to run lspci to find your BusID for > your card > > > > ----- > Claude Gélinas agr., dta > Phyto Ressources inc. > ============================================================================== > Varennes, Québec, Canada Tél.: (450) 652 > 9764, Fax.:(450) 652 6182 > Des questions sur les insectes et maladies des > plantes ornementales ? > Want to know more about ornamental > plant pest ? > http://www.phyto.qc.ca > __________________________________ Discover Yahoo! Have fun online with music videos, cool games, IM and more. Check it out! http://discover.yahoo.com/online.html _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
