Hi All - ok I have given up after getting so close. I am at the
early stages of installing mythtv. I have a wintv-dbx model 401
card. From what I know this is supported by v4l via cx8800 module.
It loads on boot up - even seems to have the correct tuner:
cx88[0]: subsystem: 0070:3401, board: Hauppauge WinTV 34xxx models
[card=1,autodetected]
tveeprom: Hauppauge: model = 34132, rev = J158, serial# = 2927402
tveeprom: tuner = Philips FM1236 MK3 (idx = 58, type = 4)
tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08, v4l2 = 0x00001000)
tveeprom: audio_processor = MSP3416 (type = 14)
great - should be working?? Well, I try xawtv and get fuzzy screen
(NTSC, usbcast). scantv finds no channels and tvtime gives this
interesting message: tuner refuses to tell us the current
frequency. This must be related.
don't think I can continue installing mythtv unless I get this
working...
I would be most grateful if someone could help. Running debian
unstable, v4l cx88 0.0.4, linux 2.6.12.2
thanks -
Rob
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
