Replying to my own post with additional info .. On 7/12/05, Eric Gilbert <[EMAIL PROTECTED]> wrote: > Hi All, > > I'm using the PX-TV402U with .18 (KnoppMyth) and can use it just fine > for Live TV, but all of the scheduled recordings the audio is out of > sync. The size is set to 640x480 and the bitrate is set to 4000 in > the recording profiles (since this appears to be the maximum rate the > hardware supports for non mpeg) and all of the check boxes marked as > well as the audio set to 48khz and quality set to 9 to try and get the > best quality. > > When I run the recording through MPlayer it shows that the FPS is 25 > (PAL) while last I checked NTSC was 29.97. And not suprisingly the > audio steadily drifts out of sync while watching. > > Is this a known issue resoled in .18.1 > > I searched the archives (using plextor and tv402) and couldn't find > much, other than support was added in march. > > Do I need to tweak some settings or do I need to tweak some code? > > Thanks, > Eric > Also when I use gorecord with the following: gorecord -input 2 -tvchan ntsc-bcast:20 -duration 60 -format mpeg4 -bitrate 4000 capture20.mp4
MPlayer reports: VIDEO: [DX50] 640x480 24bpp 29.970 fps 3693.0 kbps (450.8 kbyte/s) So I am pretty certain that I have a NTSC unit. But when Myth does a recording MPlayer reports: Detected MythTV stream, reading extended format information VIDEO: [XVID] 640x480 25.00 fps I can't find any location to set the FPS and I'm manually made sure that my channels are set to NTSC. Any thoughts? Eric _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
