Hi sorry if this has been asked before but Im at the end of my whits now. Ive been fiddling around for about 3 weeks trying to get myth working. Firstly I got a semi supported card (dvico fusion plus).... one week later got that working. sorta. using tzap and xine (No sound)
Anyway figured id go on with myth and cover the sound problem later. Ive now spent 2 weeks on trying to configure tv. Got just about everything else working (dvd's ripping weather rss and browsing) still no tv. Ive read about a thousand howto's and they mostly talk about entering the video and audio pids. Unless Im completely stupid (quite likely these days) I just cant find anywhere to add them now getting desperate as the wife wants to know where the money and time as gone. Ive been using this guide to configure as this seems to be a little more accurate for Australia http://www.users.on.net/~jani/dvico-mythtv-11.html thanks In advance Brett Stevens OS: Suse 9.3 kernel: patched 2.6.11.2 sound alsa video: adequate (this will be a master backend) myth version: mythtv-0.18.1-12 via apt-get lsmod ... snd_pcm_oss 54176 0 snd_mixer_oss 19584 1 snd_pcm_oss snd_via82xx 29888 0 snd_ac97_codec 73720 1 snd_via82xx snd_pcm 106760 3 snd_pcm_oss,snd_via82xx,snd_ac97_codec snd_timer 34564 1 snd_pcm snd_mpu401_uart 10368 1 snd_via82xx snd_rawmidi 30240 1 snd_mpu401_uart snd_seq_device 9484 1 snd_rawmidi snd 60772 9 snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_ac97_codec,snd_pcm,snd_timer,snd_m pu401_uart,snd_rawmidi,snd_seq_device usbserial 30568 0 button 6928 0 battery 9732 0 ac 5124 0 floppy 65584 0 nvram 13192 0 md5 4608 1 ipv6 271424 12 joydev 10304 0 st 39580 0 sr_mod 19876 0 sg 39200 0 cx88_dvb 6660 0 cx8802 12164 1 cx88_dvb mt352 6404 1 cx88_dvb cx88xx 49044 2 cx88_dvb,cx8802 i2c_algo_bit 9352 1 cx88xx snd_page_alloc 10500 2 snd_via82xx,snd_pcm btcx_risc 5256 2 cx8802,cx88xx gameport 5504 1 snd_via82xx videodev 10240 1 cx88xx video_buf_dvb 7300 1 cx88_dvb tg3 100868 0 i2c_viapro 8336 0 soundcore 11232 1 snd ehci_hcd 40328 0 uhci_hcd 34576 0 video_buf 24068 4 cx88_dvb,cx8802,cx88xx,video_buf_dvb video1394 20812 0 parport_pc 29764 1 ohci1394 39300 1 video1394 lp 13064 0 parport 42184 2 parport_pc,lp raw1394 42604 0 ieee1394 315476 3 video1394,ohci1394,raw1394 dm_mod 64148 0 reiserfs 271988 1 aic7xxx 184152 0 sata_promise 10884 0 libata 50052 1 sata_promise sd_mod 19712 0 scsi_mod 144840 7 st,sr_mod,sg,aic7xxx,sata_promise,libata,sd_mod dmesg BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009cc00 (usable) BIOS-e820: 000000000009cc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fffc000 (usable) BIOS-e820: 000000007fffc000 - 000000007ffff000 (ACPI data) BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 1151MB HIGHMEM available. 896MB LOWMEM available. On node 0 totalpages: 524284 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 294908 pages, LIFO batch:16 DMI 2.3 present. ACPI: RSDP (v000 ASUS ) @ 0x000f6060 ACPI: RSDT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x7fffc000 ACPI: FADT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x7fffc0b2 ACPI: BOOT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x7fffc030 ACPI: MADT (v001 ASUS A7V8X 0x42302e31 MSFT 0x31313031) @ 0x7fffc058 ACPI: DSDT (v001 ASUS A7V8X 0x00001000 MSFT 0x0100000b) @ 0x00000000 ACPI: PM-Timer IO Port: 0xe408 Allocating PCI resources starting at 80000000 (gap: 80000000:7ec00000) Built 1 zonelists Kernel command line: root=/dev/hda3 vga=0x317 selinux=0 splash=silent resume=/dev/hda1 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 2083.203 MHz processor. Using pmtmr for high-res timesource Console: colour dummy device 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2071776k/2097136k available (2614k kernel code, 24404k reserved, 686k data, 188k init, 1179632k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 4128.76 BogoMIPS (lpj=2064384) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(TM) XP stepping 00 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 0e00) checking if image is initramfs... it is Freeing initrd memory: 3247k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xf1720, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20050211 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14) *9 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Via IRQ fixup ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing ** PCI interrupts are no longer routed automatically. If this ** causes a device to stop working, it is probably because the ** driver failed to call pci_enable_device(). As a temporary ** workaround, the "pci=routeirq" argument restores the old ** behavior. If this argument makes the device work again, ** please email the output of "lspci" to [EMAIL PROTECTED] ** so I can fix the driver. pnp: 00:01: ioport range 0xe400-0xe47f could not be reserved pnp: 00:01: ioport range 0xe800-0xe81f has been reserved pnp: 00:0d: ioport range 0x290-0x291 has been reserved pnp: 00:0d: ioport range 0x370-0x372 has been reserved Simple Boot Flag at 0x3a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1121462458.504:0): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API pci_hotplug: PCI Hot Plug PCI Core version: 0.5 vesafb: framebuffer at 0xee000000, mapped to 0xf8880000, using 3072k, total 4096k vesafb: mode is 1024x768x16, linelength=2048, pages=0 vesafb: protected mode interface info at c000:0336 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: Maximum main memory to use for agp memory: 1919M agpgart: AGP aperture is 128M @ 0xf0000000 [drm] Initialized drm 1.0.0 20040925 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI interrupt 0000:00:11.1[A]: no GSI VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: Maxtor 6Y200P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: PIONEER DVD-RW DVR-109, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... hda: max request size: 1024KiB hda: Host Protected Area detected. current capacity is 398294975 sectors (203927 MB) native capacity is 398297088 sectors (203928 MB) hda: Host Protected Area disabled. hda: 398297088 sectors (203928 MB) w/7936KiB Cache, CHS=24792/255/63, UDMA(133) hda: cache flushes supported hda: hda1 hda2 hda3 hdc: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66) Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Logitech Explorer Mouse on isa0060/serio1 md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 128Kbytes TCP established hash table entries: 524288 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1835008 bytes) TCP: Hash tables configured (established 524288 bind 65536) Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 ACPI wakeup devices: PCI0 PCI1 USB0 USB1 USB2 SU20 MC97 LAN ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 188k freed SCSI subsystem initialized libata version 1.10 loaded. sata_promise version 1.01 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 PCI: setting IRQ 10 as level-triggered ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 10 (level, low) -> IRQ 10 ata1: SATA max UDMA/133 cmd 0xF887C200 ctl 0xF887C238 bmdma 0x0 irq 10 ata2: SATA max UDMA/133 cmd 0xF887C280 ctl 0xF887C2B8 bmdma 0x0 irq 10 ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:207f ata1: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_promise ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3468 86:3c01 87:4023 88:207f ata2: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_promise Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back sdb: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: setting IRQ 11 as level-triggered ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 11 (level, low) -> IRQ 11 scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 2940 Ultra2 SCSI adapter> aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs (scsi2:A:0): 80.000MB/s transfers (40.000MHz, offset 32, 16bit) Vendor: ARCHIVE Model: Python 06408-XXX Rev: 8071 Type: Sequential-Access ANSI SCSI revision: 03 ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [EMAIL PROTECTED] ieee1394: raw1394: /dev/raw1394 device initialized ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]> PCI: Enabling device 0000:00:07.0 (0094 -> 0097) ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 10 (level, low) -> IRQ 10 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[eb800000-eb8007ff] Max Packet=[2048] parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] video1394: Installed video1394 module lp0: using parport0 (interrupt-driven). lp0: console ready ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800000b1437] Adding 4200956k swap on /dev/hda1. Priority:42 extents:1 USB Universal Host Controller Interface driver v2.2 ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.0: UHCI Host Controller kobject_register failed for dvb_core (-17) [<c0203811>] kobject_register+0x51/0x60 [<c0142667>] mod_sysfs_setup+0x57/0xc0 [<c0143a6a>] load_module+0x86a/0xa40 [<c0143c97>] sys_init_module+0x57/0x320 [<c0178981>] sys_read+0x41/0x70 [<c0103a2d>] sysenter_past_esp+0x52/0x75 uhci_hcd 0000:00:10.0: irq 11, io base 0xb000 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: irq 11, io base 0xa800 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 11 (level, low) -> IRQ 11 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: irq 11, io base 0xa400 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 11 (level, low) -> IRQ 11 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: irq 11, pci mem 0xe6800000 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected tg3.c:v3.23 (February 15, 2005) PCI: Enabling device 0000:00:09.0 (0014 -> 0016) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11 eth0: Tigon3 [partno(BCM95702A20) rev 1002 PHY(5703)] (PCI:33MHz:32-bit) 10/100/1000BaseT Ethernet 00:e0:18:b9:18:5e eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] Linux video capture interface: v1.00 ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:11.5 to 64 cx2388x dvb driver version 0.0.4 loaded cx88[0]: subsystem: 18ac:db11, board: DVICO FusionHDTV DVB-T Plus [card=21,insmod option] PCI: Enabling device 0000:00:0b.2 (0014 -> 0016) ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 ACPI: PCI interrupt 0000:00:0b.2[A] -> GSI 10 (level, low) -> IRQ 10 cx88[0]/2: found at 0000:00:0b.2, rev: 5, irq: 10, latency: 32, mmio: 0xe7000000 cx88[0]/2: cx2388x based dvb card DVB: registering new adapter (cx88[0]). DVB: registering frontend 0 (DVICO FusionHDTV DVB-T Plus)... Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 1 st: Version 20041025, fixed bufsize 32768, s/g segs 256 Attached scsi tape st0 at scsi2, channel 0, id 0, lun 0 st0: try direct i/o: yes (alignment 512 B), max page reachable by HBA 1048575 tg3: eth0: Link is up at 100 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. mtrr: 0xee000000,0x2000000 overlaps existing 0xee000000,0x400000 NET: Registered protocol family 10 Disabled Privacy Extensions on device c03fe680(lo) IPv6 over IPv4 tunneling driver Disabled Privacy Extensions on device dfedd800(sit0) Non-volatile memory driver v1.2 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 ACPI: Power Button (FF) [PWRF] powernow-k8: Processor cpuid 6a0 not supported drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic usbcore: registered new driver usbserial_generic usbcore: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 eth0: no IPv6 routers present ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:11.5 to 64 _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
