On 7/19/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hi, > > I wanted to let you know that I prevailed against a PVR-500. :) > > I had the oh-so-common static / back screen. While Googling about it I > found a "bug report" for Jarod's guide filed by Niklas : > > http://svn.wilsonet.com/projects/mythtvology/ticket/20 > > … which says that the message from the ivtv driver about using the > recommended firmware version is "nothing to be worried about". Well, > sorry Jarod, it's not. ;) > > I downloaded the right firmware. I had to shutdown for a minute but > after that everything started working like a charm. > > I don't know if it's a issue with the MCE version of the PVR-500 or > certain revisions of the card. Anyhow, here's the output of lspci -vv: > > 02:08.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > Subsystem: Hauppauge computer works Inc.: Unknown device e807 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (32000ns min, 2000ns max), Cache Line Size 08 > Interrupt: pin A routed to IRQ 10 > Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > 02:09.0 Multimedia video controller: Internext Compression Inc iTVC16 > (CX23416) MPEG-2 Encoder (rev 01) > Subsystem: Hauppauge computer works Inc.: Unknown device e817 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Latency: 64 (32000ns min, 2000ns max), Cache Line Size 08 > Interrupt: pin A routed to IRQ 11 > Region 0: Memory at e4000000 (32-bit, prefetchable) [size=64M] > Capabilities: [44] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA > PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > Thanks! > > -- > cyth > > _______________________________________________ > mythtv-users mailing list > [email protected] > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > >
Is your tuner PAL or NTSC? I have a 500MCE version D492 (NTSC) that I can't get audio on the second channel. If you have the same, I'd love to know how you got the audio to work.
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
