Your absolutely right, its not the fault of this project that the
reuiqrements for MPEG4 are high. I apologise once again.
Thanks for the info, I can now see why it was pausing. will look into an
hardware based capture card.
----- Original Message -----
From: "John Kuhn" <[EMAIL PROTECTED]>
To: "Discussion about mythtv" <[email protected]>
Sent: Wednesday, July 20, 2005 5:55 AM
Subject: Re: [mythtv-users] MythShyte: One unhappy customer
from the docs
-A PIII/733MHz system can encode one video stream using the MPEG-4 codec
using 480x480 capture resolution. This does not allow for live TV
watching, but does allow for encoding video and then watching it later.
your just barely cutting it.. if you want to use that 1ghz system
effiecntly get a hardware based tv card like the PVR-250,350,500,150 or
lower the bitrate and resolution that you are using to record with your
software based card..
shitting all over mythtv will get you nowhere.. i suggest wording things
better in the future..you're lucky there is some really good guys on this
list..
25fps
no HD
no xvmc
512Mb ram
VIA chipset
640x480resolution
the pauses were less on the 1Ghz, so the system was marginally faster,
but still paused. I cant imagine what would happen if I tried to record
something!
----- Original Message ----- From: "Big Wave Dave"
<[EMAIL PROTECTED]>
To: "Discussion about mythtv" <[email protected]>
Sent: Wednesday, July 20, 2005 5:30 AM
Subject: Re: [mythtv-users] MythShyte: One unhappy customer
What is the framrate of your captured videos?
Is this HD?
Are you using xvmc?
How much RAM do you have?
What chipset is your motherboard using?
What resolution are you outputing?
I'm sure others will have more questions... but I'm sure those are
some things people will need to know before they can help.
Dave
On 7/19/05, antec <[EMAIL PROTECTED]> wrote:
I am atill getting prebuffer pause even though I have done everything
recommended in the documentation pages:
* bought and installed a geforce card
* got xwindows working with nvidia
* upgraded machine to a P3-1Ghz. (not a celeron!)
* checked and reconfigured all of the TV settings under mythtv.
Mythtv on my system was build using fc3 and atrpms. So I compiled
nothing.
Am I missing something crucial here, or is this just a case of sloppy
code.
This project has cost me time and money to get a result that is no
better
than "myth-shyte". After all, why would I now go and buy a p4-3.3 to
watch
tv, when I can just plug in my P1 and do the same thing (without
buffering
naturally).
Unless Im blind in both eyes and delusional, I think the next step is to
return to freevo aka bugvo and give mythtv the myth-skip.
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
