From: Al Furman <[EMAIL PROTECTED]>
Reply-To: Discussion about mythtv <[email protected]>
Date: Wed, 20 Jul 2005 23:28:40 -0400
To: <[email protected]>
Subject: [mythtv-users] irw problems
Thanks Nick. lircd is running and is writable. Any other thoughts? I am perplexed.
[EMAIL PROTECTED] ~]$ ls -l /dev/lirc?
crw------- 1 root root 61, 0 Jul 16 22:45 /dev/lirc0
srw-rw-rw- 1 root root 0 Jul 16 22:51 /dev/lircd
-Al
On Jul 19, 2005, at 3:39 AM, [EMAIL PROTECTED] wrote:
Message: 5
Date: Tue, 19 Jul 2005 16:08:29 +1200
From: Nick Rout <[EMAIL PROTECTED]>
Subject: Re: [mythtv-users] irw problems
To: Discussion about mythtv <[email protected]>
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset="US-ASCII"
irw watches /dev/lircd, which is not the same as /dev/lirc or /dev/lirc0
to have a valid /dev/lircd you need to have the daemon running.
On Mon, 18 Jul 2005 23:11:42 -0400
Al Furman wrote:
I am building a myth box using Jarod's guide and have been stuck
getting lirc to work with the IR receiver from zapway.de.
I can see signals from my remote using mode2 and when I cat /dev/lirc
or /dev/lirc0. I see no signals when I run irw. There are no
relevant errors in /var/log/messages or dmesg. I have tested using
different remotes and lircd config files to no avail. I am going to
try compiling lirc in debug mode next, but was wondering if anyone in
the group had any suggestions I may be missing.
Thanks
--
Nick Rout
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
