> >> On 7/15/05, Robin Gilks <[EMAIL PROTECTED]> wrote: >>> Greetings >>> >>> An odd one here on an Epia SP13000 m/b. Watching TV, playing back a >>> recording, watching video (mplayer) or DVD (Xine) are all fine when I >>> use >>> the Unichrome driver in 720x576NoScale mode but the Mythtv menus are >>> screwed up - interlace problem I think. >>> >> >> define "screwed up" >> and "interlace problem I think" >> >> > > screwed up = Mythtv menus unreadable due to scan lines be overlaid, one on > top of another or maybe in the wrong order. I also get vertical banding > but I can't suss out an algorithm that would describe it. I'll have a go > at taking a couple of pix tonight and put onto my web site. > > interlace problem I think = not having seen an interlace problem since the > days of 405 line TV (yup, I'm that old!!) I'm guessing. I see no change to > the timing of the horizontal sync as I change displayed items but my > 'scope doesn't have the resolution to see small changes in frame sync. > I'll see if I can borrow a digital 'scope from work and check the signals > again. > > Its very odd that watching direct TV, replaying a program both in Mythtv > or a video in mplayer or DVD in xine are all perfectly OK. Its just the > Mythtv menus that are "screwed up"!!
I slowed the shutter down as much as I could but there are still a few artifacts in the pictures but hopefully these will indicate the problem I'm having... http://gilks.ath.cx/gallery/mythtv -- Robin Gilks _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
