On 7/25/05, Dan Rampton <[EMAIL PROTECTED]> wrote: > Thanks Steve, great directions. I just hadn't applied the DVB > patches. It's getting closer to working now. :-)
> [EMAIL PROTECTED] ~]# /usr/local/bin/azap KCBS > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > tuning to 749000000 Hz > video pid 0x0000, audio pid 0x0000 > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | > status 00 | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | The only "gotcha" I've run into with these cards is that occasionally. they will fail to tune anything, like you're seeing in your azap. Typically a modprobe will resolve the issue, and if that doesn't, a reboot will. The tuner is a little weaker than my rev 0.3 card, but given a strong enough signal, there's no diff between the two in use with Myth. I didn't have a lot of good luck running both in the same machine, but I did have them working together for a while. The other thing I notice is that this Rev 0.2 card has no QAM support, whereas my Rev 0.3 does. The backend running this Rev 0.2 card for me is running 2.6.12.1 with DVB-patches, and ATRPM's myth. It's working very well over all, and I see the price has been dropped another $20. :) As long as you don't mind a little pain in the beginning, I would heartily recommend getting this card. Heck, if I had a serious need for it, I'd buy another.. we'll see what fall sweeps look like. _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
