loaded the module with the debug option as you suggested and came up
with this from /var/log/messages:
Jul 25 21:51:59 localhost kernel: ivtv: version 0.2.0 (rc3j) loading
Jul 25 21:51:59 localhost kernel: ivtv: ... running on kernel
2.6.12-1.1372_FC3
Jul 25 21:51:59 localhost kernel: ivtv: Setting some variables to
invalid for detection
Jul 25 21:51:59 localhost kernel: ivtv: Scanning PCI bus..
Jul 25 21:51:59 localhost kernel: ivtv: Found card #0
Jul 25 21:51:59 localhost kernel: ivtv: Autodetected WinTV PVR 350 card
Jul 25 21:51:59 localhost kernel: ivtv: Found an iTVC15 based chip
Jul 25 21:51:59 localhost kernel: ivtv: base addr: 0xe4000000
Jul 25 21:51:59 localhost kernel: ivtv: Enabling pci device
Jul 25 21:51:59 localhost kernel: ACPI: PCI Interrupt 0000:02:01.0[A]
-> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
Jul 25 21:51:59 localhost kernel: ivtv: Bus Mastering Enabled.<6>ivtv:
Unreasonably low latency timer, setting to 64 (was 32)
Jul 25 21:51:59 localhost kernel: ivtv: 2051 (rev 1) at 02:01.0, ivtv:
irq: 10, latency: 64, memory: 0xe4000000
Jul 25 21:51:59 localhost kernel: ivtv: XXX PCI device: 0x2570 vendor:
0x8086
Jul 25 21:51:59 localhost kernel: ivtv: attempting ioremap at
0xe4000000 len 0x00800000
Jul 25 21:51:59 localhost kernel: ivtv: attempting ioremap at
0xe5000000 len 0x00800000
Jul 25 21:51:59 localhost kernel: ivtv: attempting ioremap at
0xe6000000 len 0x00010000
Jul 25 21:51:59 localhost kernel: ivtv: activating i2c...
Jul 25 21:51:59 localhost kernel: tuner 2-0061: chip found @ 0xc2 (ivtv
i2c driver #0)
Jul 25 21:51:59 localhost kernel: ivtv: Active card count: 1.
Jul 25 21:51:59 localhost kernel: ivtv: Loaded module tveeprom
Jul 25 21:51:59 localhost kernel: tveeprom: Hauppauge: model = 48132,
rev = K268, serial# = 7876017
Jul 25 21:51:59 localhost kernel: tveeprom: tuner = LG TAPE H001F MK3
(idx = 68, type = 47)
Jul 25 21:51:59 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom
= 0x08, v4l2 = 0x00001000)
Jul 25 21:51:59 localhost kernel: tveeprom: audio_processor = MSP3440
(type = 11)
Jul 25 21:51:59 localhost kernel: ivtv: Loaded module tuner
Jul 25 21:51:59 localhost kernel: saa7115: starting probe for adapter
SMBus I801 adapter at 0c00 (0x0)
Jul 25 21:51:59 localhost kernel: saa7115: starting probe for adapter
cx88[0] (0x1001b)
Jul 25 21:51:59 localhost kernel: saa7115: starting probe for adapter
ivtv i2c driver #0 (0x10005)
Jul 25 21:51:59 localhost kernel: saa7115: detecting saa7115 client on
address 0x42
Jul 25 21:51:59 localhost kernel: saa7115: writing init values
Jul 25 21:52:00 localhost kernel: saa7115: status: (1E) 0x00, (1F) 0xc0
Jul 25 21:52:00 localhost kernel: ivtv: Loaded module saa7115
Jul 25 21:52:00 localhost kernel: saa7127: Ignoring new-style
parameters in presence of obsolete ones
Jul 25 21:52:00 localhost kernel: saa7127: video encoder driver version
V 0.3 loaded
Jul 25 21:52:00 localhost kernel: saa7127: detecting saa7127 client on
address 0x88
Jul 25 21:52:00 localhost kernel: saa7127: Selecting NTSC video Standard
Jul 25 21:52:00 localhost kernel: saa7127: Selecting S-Video+Composite
Jul 25 21:52:00 localhost kernel: saa7127: Turn WSS off
Jul 25 21:52:00 localhost kernel: saa7127: Widescreen Mode 4:3 Full
Format
Jul 25 21:52:00 localhost kernel: saa7127: Selecting Normal Encoder
Input
Jul 25 21:52:00 localhost kernel: saa7127: Enable Video Output
Jul 25 21:52:00 localhost kernel: saa7127: detecting saa7127 client on
address 0x88
Jul 25 21:52:00 localhost kernel: saa7127: Selecting NTSC video Standard
Jul 25 21:52:00 localhost kernel: saa7127: Selecting S-Video+Composite
Jul 25 21:52:00 localhost kernel: saa7127: Turn WSS off
Jul 25 21:52:00 localhost kernel: saa7127: Widescreen Mode 4:3 Full
Format
Jul 25 21:52:00 localhost kernel: saa7127: Selecting Normal Encoder
Input
Jul 25 21:52:00 localhost kernel: saa7127: Enable Video Output
Jul 25 21:52:00 localhost kernel: ivtv: Loaded module saa7127
Jul 25 21:52:00 localhost kernel: msp34xx: ivtv version
Jul 25 21:52:00 localhost kernel: msp34xx: init: chip=MSP3448W-A2, has
NICAM support, simple (D) mode, simpler (G) no-thread mode
Jul 25 21:52:00 localhost kernel: msp34xx: $Id$ compiled on: Jul 16
2005 12:42:45
Jul 25 21:52:00 localhost kernel: ivtv: Loaded module msp3400
Jul 25 21:52:00 localhost kernel: ivtv: Stopping VDM
Jul 25 21:52:00 localhost kernel: ivtv: Stopping AO
Jul 25 21:52:00 localhost kernel: ivtv: pinging (?) APU
Jul 25 21:52:00 localhost kernel: ivtv: Stopping VPU
Jul 25 21:52:00 localhost kernel: ivtv: Resetting Hw Blocks
Jul 25 21:52:00 localhost kernel: ivtv: Stopping SPU
Jul 25 21:52:00 localhost kernel: ivtv: Sleeping for 10ms
Jul 25 21:52:00 localhost kernel: ivtv: init Encoder SDRAM pre-charge
Jul 25 21:52:00 localhost kernel: ivtv: init Encoder SDRAM refresh to
1us
Jul 25 21:52:00 localhost kernel: ivtv: init Decoder SDRAM pre-charge
Jul 25 21:52:00 localhost kernel: ivtv: init Decoder SDRAM refresh to
1us
Jul 25 21:52:00 localhost kernel: ivtv: Sleeping for 600ms (600
recommended)
Jul 25 21:52:01 localhost kernel: ivtv: Card ready for firmware!
Jul 25 21:52:01 localhost kernel: ivtv: Loading encoder image
Jul 25 21:52:01 localhost kernel: ivtv: Loading decoder image
Jul 25 21:52:01 localhost kernel: ivtv: Sleeping for 10 ms
Jul 25 21:52:01 localhost kernel: ivtv: Sleeping for 10 ms
Jul 25 21:52:01 localhost kernel: ivtv: GPIO INIT
Jul 25 21:52:01 localhost kernel: ivtv: About to search for mailboxes
Jul 25 21:52:01 localhost kernel: ivtv: Searching for encoder mailbox
Jul 25 21:52:01 localhost kernel: ivtv: .ivtv: match: 0x34567812 at
0xe4580104. match: 1
Jul 25 21:52:01 localhost kernel: ivtv: match: 0x56781234 at
0xe4580108. match: 2
Jul 25 21:52:01 localhost kernel: ivtv: match: 0x78123456 at
0xe458010c. match: 3
Jul 25 21:52:01 localhost kernel: ivtv: found encoder mailbox!
Jul 25 21:52:01 localhost kernel: ivtv: Searching for decoder mailbox
Jul 25 21:52:01 localhost kernel: ivtv: .ivtv: .ivtv: .ivtv: .ivtv:
match: 0x34567812 at 0xe4e00404. match: 1
Jul 25 21:52:01 localhost kernel: ivtv: match: 0x56781234 at
0xe4e00408. match: 2
Jul 25 21:52:01 localhost kernel: ivtv: match: 0x78123456 at
0xe4e0040c. match: 3
Jul 25 21:52:01 localhost kernel: ivtv: found decoder mailbox!
Jul 25 21:52:01 localhost kernel: ivtv: Getting firmware version..
Jul 25 21:52:01 localhost kernel: ivtv: Getting encoder firmware rev.
Jul 25 21:52:01 localhost kernel: ivtv: Getting decoder firmware rev.
Jul 25 21:52:01 localhost kernel: ivtv: v4l2 streams setup
Jul 25 21:52:01 localhost kernel: ivtv: Configuring WinTV PVR 350 card
with 9 streams
Jul 25 21:52:01 localhost kernel: ivtv: Create DMA stream 0 using 256
16384 byte buffers 4194304 kbytes total
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 0 minor 1
Jul 25 21:52:01 localhost kernel: ivtv: Create DMA stream 1
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 1 minor 32
Jul 25 21:52:01 localhost kernel: ivtv: Create stream 2 using 40 52224
byte buffers 2097152 kbytes total
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 2 minor 225
Jul 25 21:52:01 localhost kernel: ivtv: Create DMA stream 3 using 455
4608 byte buffers 2097152 kbytes total
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 3 minor 24
Jul 25 21:52:01 localhost kernel: ivtv: Create stream 4
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 4 minor 65
Jul 25 21:52:01 localhost kernel: ivtv: Create DMA stream 5 using 16
65536 byte buffers 1048576 kbytes total
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 5 minor 16
Jul 25 21:52:01 localhost kernel: ivtv: Create stream 6 using 1024 2048
byte buffers 262144 kbytes total
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 6 minor 228
Jul 25 21:52:01 localhost kernel: ivtv: Create stream 7
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 7 minor 232
Jul 25 21:52:01 localhost kernel: ivtv: Create DMA stream 8
Jul 25 21:52:01 localhost kernel: ivtv: Registered v4l2 device,
streamtype 8 minor 48
Jul 25 21:52:01 localhost kernel: ivtv: Starting Threads
Jul 25 21:52:01 localhost kernel: ivtv: Setting Tuner 47
Jul 25 21:52:01 localhost kernel: tuner 2-0061: type set to 47 (LG NTSC
(TAPE series))
Jul 25 21:52:01 localhost kernel: saa7115: decoder set input (4)
Jul 25 21:52:01 localhost kernel: saa7115: now setting Composite input
Jul 25 21:52:01 localhost kernel: ivtv: Setting audio to input 0
Jul 25 21:52:01 localhost kernel: ivtv: encoder thread sleeping 5038
Jul 25 21:52:01 localhost kernel: ivtv: decoder thread sleeping 5039
Jul 25 21:52:01 localhost kernel: ivtv: v4l2 ioctl: set standard
Jul 25 21:52:02 localhost kernel: saa7115: decoder set norm NTSC
Jul 25 21:52:02 localhost kernel: saa7115: set audio: 0x01
Jul 25 21:52:02 localhost kernel: saa7127: Setting Encoder Video
Standard
Jul 25 21:52:02 localhost kernel: saa7127: Set NTSC Video Mode
Jul 25 21:52:02 localhost kernel: saa7127: Selecting NTSC video Standard
Jul 25 21:52:02 localhost kernel: ivtv: Initialized WinTV PVR 350, card
#0
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 open on minor 1
Jul 25 21:52:06 localhost kernel: ivtv: current minor 1
Jul 25 21:52:06 localhost kernel: ivtv: opened card # 1, stream 0
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl 0x80685600
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl: querycap
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 close
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 open on minor 32
Jul 25 21:52:06 localhost kernel: ivtv: current minor 1
Jul 25 21:52:06 localhost kernel: ivtv: current minor 32
Jul 25 21:52:06 localhost kernel: ivtv: opened card # 1, stream 1
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl 0x80685600
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl: querycap
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 close
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 open on minor 48
Jul 25 21:52:06 localhost kernel: ivtv: current minor 1
Jul 25 21:52:06 localhost kernel: ivtv: current minor 32
Jul 25 21:52:06 localhost kernel: ivtv: current minor 225
Jul 25 21:52:06 localhost kernel: ivtv: current minor 24
Jul 25 21:52:06 localhost kernel: ivtv: current minor 65
Jul 25 21:52:06 localhost kernel: ivtv: current minor 16
Jul 25 21:52:06 localhost kernel: ivtv: current minor 228
Jul 25 21:52:06 localhost kernel: ivtv: current minor 232
Jul 25 21:52:06 localhost kernel: ivtv: current minor 48
Jul 25 21:52:06 localhost kernel: ivtv: opened card # 1, stream 8
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl 0x80685600
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl: querycap
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 close
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 open on minor 16
Jul 25 21:52:06 localhost kernel: ivtv: current minor 1
Jul 25 21:52:06 localhost kernel: ivtv: current minor 32
Jul 25 21:52:06 localhost kernel: ivtv: current minor 225
Jul 25 21:52:06 localhost kernel: ivtv: current minor 24
Jul 25 21:52:06 localhost kernel: ivtv: current minor 65
Jul 25 21:52:06 localhost kernel: ivtv: current minor 16
Jul 25 21:52:06 localhost kernel: ivtv: opened card # 1, stream 5
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl 0x80685600
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl: querycap
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 close
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 open on minor 24
Jul 25 21:52:06 localhost kernel: ivtv: current minor 1
Jul 25 21:52:06 localhost kernel: ivtv: current minor 32
Jul 25 21:52:06 localhost kernel: ivtv: current minor 225
Jul 25 21:52:06 localhost kernel: ivtv: current minor 24
Jul 25 21:52:06 localhost kernel: ivtv: opened card # 1, stream 3
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl 0x80685600
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 ioctl: querycap
Jul 25 21:52:06 localhost kernel: ivtv: v4l2 close
it *looks* fine to me, but i'd be suprised if i hadn't missed anything.
i've also been trying to play around with ivtvctl to try and manually
set frequencies. however, i've found that no matter what i tell
ivtvctl to do, it goes back to the default. for example:
[EMAIL PROTECTED] profile.d]# ivtvctl -A -d /dev/video1
ioctl: VIDIOC_ENUMAUDIO
Input : 0
Name : Tuner Audio In
Input : 1
Name : Audio Line In
[EMAIL PROTECTED] profile.d]# ivtvctl -Q -d /dev/video1
ioctl: VIDIOC_G_AUDIO
Input = 0: Tuner Audio In
[EMAIL PROTECTED] profile.d]# ivtvctl -q=1 -d /dev/video1
ioctl: VIDIOC_S_AUDIO
Input set to 0
it sure seems that ivtvctl is ignoring commands. certainly any time i
tried to give it a new frequency it would not give an error, but it
also would end up on frequency 0
jr
On Jul 25, 2005, at 11:20 AM, Petersen Curt wrote:
Have you tried checking that ivtv is loading properly? Place the
following line in your config:
options ivtv ivtv_debug=2
If you already have options for ivtv declared, just add the
"ivtv_debug" on the end
Remove all of your ivtv-related modules (ivtv, tuner, tveeprom, etc.),
or alternatively you can just reboot your machine. Then load ivtv.
Run dmesg (or check your /var/log/messages" and post the output
between the "**** IVTV *****" lines.
You can run "dmesg | tail -f" to watch the log while you fire up
ptune-ui.
Be careful if you decide to actually capture some video while changing
channels. I wouldn't try looking at the ivtv debug while you're
capturing. You'll get a billion messages about DMA blocks being
transferred. Use ivtv_debug=1if you want to get rid of those
messages.
On 7/25/05, JR Powers-Luhn <[EMAIL PROTECTED]> wrote:
some more information, in case anyone feels like they can help us out:
I tried just running ptune-ui and selecting channels with that and got
some output (that I had previously believed to be from mplayer):
XS_Tk__Callback_Call error:Error: changeChannel(6) failed!
Tk::Error: Error: changeChannel(6) failed!
Tk::Widget::Callback at
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/Tk/Widget.pm
line 1079
Tk::BrowseEntry::LbChoose at
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/Tk/
BrowseEntry.pm line 296
Tk::BrowseEntry::ListboxRelease at
/usr/lib/perl5/vendor_perl/5.8.5/i386-linux-thread-multi/Tk/
BrowseEntry.pm line 163
<ButtonRelease-1>
(command bound to event)
Once again, anyone who has any ideas, please drop me a line. I have
no
idea what I might be doing wrong, and Google searches have not proven
to be terribly useful.
JR
On Jul 20, 2005, at 10:48 AM, Ijaaz A. Ullah wrote:
I have the same problem. I was just about to post a message when I
found
yours.
I have a 350 and a 250 in my backend. I just upgraded to FC4 (using
apt).
Prior to this, everything was working properly. After the upgrade, I
am
able to watch previously recorded programs and access the backend
from
my
remote frontend without any issues.
But, when I try to watch live tv, I can watch one channel (channel
4).
When
I try to change channels, the guide shows that the channel has
changed
and
updates the info, but the channel is stuck. i.e. if I change to
channel 5,
it shows the program info for chan 5, but the video/audio from
channel
4.
I've tried scheduling recordings for different channels, but I get
the
proper program name, but again, video/audio from channel 4.
I can not for the life of me find any errors in any logs.
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of JR Powers-Luhn
Sent: Wednesday, July 20, 2005 1:06 AM
To: [email protected]
Subject: [mythtv-users] can't change channels on PVR-350
Howdy-
I'm trying to build a MythTV box with a PVR-350 and a pcHDTV tuner
cards using Fedora Core 3 (mostly following Jared's guide). I
installed ivtv version 0.2.0 and could watch and record video, but
only
one channel. I can't change using myth OR ptune-ui. Nothing
glaringly
obvious in the logs, but I'm new and could have missed something.
I tried putting a line in modprobe.conf telling it that I had tuner
47
(that information gleaned from the logs), but to no avail.
Anyone think they can help? I'm eager to see myth in action.
JR
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
