On 7/28/05, Nicholas Gibson <[EMAIL PROTECTED]> wrote: > Hello, > > I have two mythtv servers, each one with 1 PVR-350 > card and each one hooked into it's own digital cable > box. > > Presently I have one machine working as the master > backend and the other one configured as (I think) a > slave backend. The slave hooks into the Master's > database and has no Video source configured per the > mythtv documentation. > > No matter what I do I can't get mythtv to schedule > anything out of the slave's pvr-350 card. If anything > is recording on the master I can't watch tv or record > anything on the slave. > It's like the capture card configuration is > conflicting on each machine and it's only seeing the > master's 350 card in the database. > I used mythtvsetup on each machine to set up the > capture card and input configuration. > > What am I doing wrong or is it just not possible to > have two capture cards working in separate machines, > one existing in a slave? > > Any help would be much appreciated. > > Thanks > > >
_________________________________________________ This reads to me as if you don't have your slave configured correctly. On the slave you should configure the PVR350 as a capture device, and assign it a video source (you don't need to create a new video source, the one you created on the master should be present as a choice on the slave). This should be sufficient for both cards to be used simultaneously... _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
