I reliably get my PVR-500 (and my PVR-150) to work on my FC4 setup using the ATRPMs at-testing version of ivtv (currently ivtv 0.3.6w), then go back to an earlier version of firmware as recommended here: http://ivtv.writeme.ch/tiki-index.php?page=FirmwareVersions . (Instructions for installing the firmware this way are here: http://ivtv.writeme.ch/tiki-index.php?page=ExtractingTheFirmware) I am not convinced that the v0.2 versions of ivtv won't work, but I know the 0.3 versions work and I've had no problems with them yet.
I am experimenting with configurations, so I've used this method to get my PVR-500 and PVR-150 working in separate boxes as well as all in one box. Also, the ivtv thread link above makes a lot of sense to me. I have to not just reboot, but shutdown my machine and restart to get the new firmware to work (it loads but I still have no sound and/or static). Finally, I only use my tuner 0's, so no promises that this makes the other inputs work. Hope this helps! Rob _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
