Howard Cokl wrote:
Dylan Keon wrote:
I have a working MythTV system (FC3, ATRPMS) with two PVR-250s. I
added a PVR-150 tonight, upgraded to the latest kernel and ivtv
0.3.6w, and I can get video via the PVR-150 (no sound, though). My
goal is to have the two PVR-250s record analog cable (already
working), and the PVR-150 record OTA broadcast signals via my rooftop
antenna since the reception of local channels stinks on our analog
cable.
I set up a new video source called "antenna" and configured a new
"local broadcast" channel listing for my area at zap2it. However,
it's not clear to me how this will get handled in the EPG. For
example, channel 7 on analog cable is Discovery, while channel 7 on
broadcast is PBS. After running mythfilldatabase these both appear in
the EPG, but where channels are the same (i.e., channel 9 is the same
station on both cable and OTA), there is only one entry in the EPG.
What you need to do is go into the Channel Editor (either in
mythtv-setup or mythweb) and change the channel number. In my case I
have channel 7 (pvr250 connected to directv), channel 7-1 (wintv-go
OTA NTSC) and 7HD (pchdtv 3K).
You can also drop channel 7 in zap2it from the PVR-250 lineup so that
there is only one channel 7 since the other channel 7 has such bad
reception anyways.
Kevin
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
