If anyone's interested, the way I fixed this was to set up two different
profiles at zap2it and attach one to my firewire and one to my hd3000.
On the zap2it configuration page, I chose the channels I preferred for
each input. The overlapping channels will preferentially record using
firewire since that's the capture card I installed first. Now I can
also use the "y" hotkey while watching live tv to switch between the two
inputs (assuming I'm on one of the channels that overlap, otherwise myth
ignores the switch command).
- Don
Donald Oakes wrote:
Donald Oakes wrote:
I have a single master backend with two capture cards configured:
firewire from a DCT-6200, and an HD3000 as a standard V4L card. I
would like to have the backend preferentially use firewire capture
for certain channels, and the HD3000 for others (whether I'm watching
Live TV or scheduling a recording). I'm retrieving my lineup via
DataDirect. I've tried configuring two separate video sources and
attaching them as input connections to the two capture cards.
However, whenever I change channels while watching live TV,
mythbackend always seems to want to use whichever capture card I
configured first.
It seems I must be missing something since I imagine this would be a
fairly common scenario. But I've scoured the users list to no
avail. Any guidance would be greatly appreciated.
Thanks,
- Don
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
I forgot to mention that I'm running 0.18.1 built from tarred source.
I'm sure there must be a post somewhere about how to do this, but I
can't seem to come up with the search terms to locate it.
Thanks,
- Don
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
_______________________________________________
mythtv-users mailing list
[email protected]
http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
