On 8/17/05, Scott Minneman <[EMAIL PROTECTED]> wrote: > Hey all, I'm (re)building my combined backend/frontend, which uses two > WinTV-Go cards. I cannot for the life of me get the tuners to > function properly. They do not autodetect (in FC3), so I have to use > modprobe.conf to set the card and tuner options. > > On the tuners themselves is printed NTSC 44981 Rev E199. In dmesg, > tveeprom reports "tuner=<unknown>". Google searches have turned up > nothing useful, and the ftvco script (find_tvcardoptions.sh) also > failed to discover a working configuration. > > The most frustrating thing about it is that these same tuners have > worked for me before, until the system crashed. Unfortunately, I was > backup-less (will never make that mistake again), so I can't go back > and look at the settings that worked then. > > Is anyone using this card, or have any suggestions for how to figure > out the proper settings?
>From reading I think the tuner type should be set to 2 for NTSC if using the cx88 driver. Which chips do the cards use? Nick _______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
